Menus; Live-View Icon; Startup And Power Off; Boot Up - Jovision JVS-ND6604-DZ User Manual

2.1. Menus

1. Task Bar
Move the mouse to the bottom of the screen, the Task bar will pop-up. You can access the start menu,
Chanel sort, View layouts, Channel auto switch, Network Information, HDD Information and NVR
Information.
2. Right click menu
Right click on the screen, the menu will show. With right click menu, you can access Main menu, Quick
access (Recently used five operations), Screen layouts (Single and Multi), Playback and Backup.
3. Quick access menu
Click on the channel with live video, the Quick access menu will pop-up, in which you can access PTZ,
Instant Playback, Snapshot, Digital Zoom, Volume Control, Record and Camera settings.
4. Main menu
In Main menu, you can access the Channels, Playback, Record, Alarm, Storage, Backup, network, IVS,
System and Maintenance settings.

2.2. Live-View Icon

There will be some icons showing on the channel live view window, which indicate the channel recording
or alarming status. You can refer to the following sheet for channel recording or alarming status
information.
Icon Instruction
Recording...
Connected by remote client

3. Startup and Power off

3.1. Boot up

Make sure all the devices in the environment have been configured and connected properly. Power-on the
NVR. NVR system will search and connect network camera in the environment automatically. After
searching and adding, the system will display live-video of the cameras added.
Notes:
Only when the NVR boot up for first time, or there is no network camera added before, will the NVR search
and add network camera automatically.

3.2. Login

After booting up and connecting the network cameras, the system is in multiple-channel display mode.
You need to login for further operations. Click any item in menu, the Login dialog box appears.
Note: Three consecutive login attempt failure will result system alarm and mouse lock for 30sec.
Copyright©2020 Jovision Technology Co., Ltd. All rights reserved.
Icon Instruction
Alarm enabled, but not triggered
Alarming...
10