Service/Troubleshooting; Technical Specifications - Sachtler Reporter LED Manual

Manual
8

Service/Troubleshooting

There are no servicable parts inside the Reporter LED
light fixture.
Please use the following troubleshooting tips in case of malfun-
ction.
Problem
No light output:
9

Technical Specifications

Construction:
Protective class:
Input:
Input Voltage:
Input Power:
Light output: (1 m distance)
with Reflector Spot
with Reflector Wide
Focusing ratio:
Permissible ambient temperature:
Max. housing temperature:
Weight of light fixture:
(incl. barndoor)
Mounting:
Remedy
Is the on/off switch set to "on"?
Is the connection to power source OK
and the power cable undamaged?
Wrong wiring ?
in accordance with EN 60 598-2-17
III protective low voltage
Cable 0,85 m (33") with PowerTap connector
6 VDC - 24 VDC
max. 8 W
1181 Lux, angle of half intensity 28°
377 Lux, angle of half intensity 64°
by changing reflector
-20 °C bis 40 °C
54 °C (129 °F)
400 g (0.9 lbs)
Camera mounting shoe or 1/4" threaded pin
- 14 -
Reporter LED