Reporter LED
3.3 Starting the Reporter LED
Connect the Anton/Bauer Power Tap
connector to an appropriate power source
(nominal voltage of 6 VDC to 24 VDC).
3.4 Adapter
For alternative use of power sources see adapters in chap-
ter 7, "Accessories".
3.5 ON/OFF switching of the Reporter
LED
Switch the R8LEDim on by pushing the
ON/OFF switch on the backside of the
housing.
Caution: A safe operation is only warranted between
6VDC and 28 VDC. Exeeding 33 VDC of input voltage
will destroy the electronics inside the Reporter LED
light fixture.
3.6 Dimming
The Reporter LED is dimmable from 20% - 100%. It can
be simply adjusted by turning the dimming knob.
- 5 -
Manual