Note Led Module - Sachtler Reporter LED Manual

Reporter LED
LED-Module assembly:
We recommend setting the four recessed head screws
(Phillips) in following order and to screw them in only
slightly:
1. Upper recessed head screw (1)
2. Lower recessed head screw (2)
3. Sideways recessed head screws (3 & 4)
Only tighten them after having fixed all four screws. Do
not tighten too firmly.
Reassemble optical system and barn door module as
described in chapter 4.

5.3 Note LED module:

The LED module is an opto-electronic component.
Please keep in mind:
Á Store in a dry, electrostatic case
Á do not clean with a wet towel
Á only use antistatic brushed or cloths
Á keep free of grease
front side
electronic contacts
- 9 -
Manual
1
4 3
2
back side