Maintenance & Settings; Charger; Cleaning - VOLTA VSM User Manual

6. MAINTENANCE & SETTINGS
6.1 Battery
Keep your vehicle away from cold and if possible in your garrage. In this way
your battery lifetime will be extended.
6.1.1 Do not disassemble the batteries.
6.1.2 Keep batteries away from children.
6.1.3 Do not connect anode and cathode of your charge device while
charging or emptying. Do not use insulators between anode and cathode.
This would cause for short circuit to occur.
6.1.4 Do not leave batteries inside water.
6.1.5 Protect batteries from temperatures of 60 degrees or above.
6.1.6 Do not allow it to be subject to physical dashes such as hitting, throwing
or falling down.
6.1.7 Do not use cutting or piercing tools on batteries.If there is any problem
and it is contacted with your skin or your eyes,
6.1.8 wash them with plenty of water.
6.1.9 If any physical changes such as smelling, heating, burning or color
changes in relation to your battery, remove it from your vehicle promptly and
keep away.

6.2 Charger

6.2.1 Only use the original charge device that is specially designed for your
product. It operates at 220V. Absolutely do not lower it to 110V.
6.2.2 Your device should be closed when it is being charged.
6.2.3 Do not move your vehicle when it is charging.

6.3 Cleaning

6.3.1 When you are washing your vehicle, absolutely do not use water with
very high pressure. Water with high pressure can cause for some parts to get
watery. Parts taking water in would lose their performance and they would
become defective. It is recommended for you to clean your vehicle with wet
cloth.
6.3.2 Absolutely do not lubricate brake system and tires.
6.3.3 Use oil to clean metal parts of your vehicle.
6.3.4 While cleaning painted plastic parts, always use standard cleaning
materials. Wipe it with cloths following cleaning.
35
www.volta.com.tr