English | 11 - Bosch S 500 A PROFESSIONAL Operating Instructions Manual

OBJ_BUCH-117-002.book Page 11 Tuesday, December 12, 2006 1:20 PM
Safety Rules
Read all safety warnings and in-
WARNING
structions that were provided with
the drill stand or the drill. Failure to follow the safety
warnings and the instructions may result in electric
shock, fire and/or serious injury.
Save all safety warnings and instructions for
future reference.
Disconnect the plug from the power source
before making any adjustments or changing
accessories. Starting drills accidentally is the
cause of some accidents.
Assemble the drill stand properly before
mounting the drill. The correct assembly is impor-
tant in order to ensure proper function.
Before using, fasten the drill securely to the
drill stand. An unsecured drill in the drill stand can
lead to loss of control.
Fasten the drill stand on a firm and level sur-
face. When the drill stand can slip away or wobble,
then the drill cannot be guided uniformly and
securely.
Do not overload the drill stand and do not use
it as a ladder or scaffold. Overloading or stand-
ing on the drill stand can raise the drill stand's cen-
tre of gravity and cause it to tip over.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
Avoid abnormal body posture. Provide for a
secure stance and keep your balance at all
times. In this manner, you can control the power
tool better in unexpected situations.
Maintain the drill stand with care. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the function of the drill stand.
Have damaged parts repaired before using
the drill stand. Many accidents are caused by
poorly maintained devices.
Store idle drill stands out of the reach of chil-
dren and do not allow persons unfamiliar with
the device or these instructions to operate the
device. Drill stands are dangerous in the hands of
untrained users.
Have your drill stand serviced/repaired only
by a qualified repair person using original
replacement parts. This will ensure that the safety
of the device is maintained.
Hold the drill stand only by the insulated han-
dles, when performing an operation where
the drilling tool can run into hidden wiring or
1 609 929 J54 • 12.12.06
its own mains cable. Contact with a "live" wire
can make metal parts of the drill stand "live" and
lead to an electric shock.
The safety and operating instructions for the
drill and the accessories being used are
strictly to be observed!
Before any work on the drill stand or the drill,
during work breaks as well as when not using
for extending periods, secure the drill stand
against unintentional moving by engaging the
feed lock 3.
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warn-
ings and instructions may result in electric
shock, fire and/or serious injury.
While reading the operating instructions,
unfold the graphics page of the drill stand
and leave it open.
Intended Use
The drill stand is intended as a mounting device for
Bosch diamond drills. Other machines may not be
mounted.
The drill stand can be fastened to the ground or to walls
by means of an anchor, vacuum or a quick-clamping
column. In combination with the diamond drills
GDB 1600 WE or GDB 1600 DE, the drill stand can
also be fastened overhead.
Technical Data
Drill stand for diamond drills
Article number
Dimensions
– Height
– Width
– Depth
Drill stroke, max.
Max. drilling diameter
with:
– GDB 1600 WE/DE**
– GDB 2500 WE***
Weight according to
EPTA-Procedure
01/2003
* with supporting angles mounted to the rear
** with suction head
*** also possible with water collection ring (accessory)
Please observe the article number on the type plate of your
drill stand. The trade names of individual drill stands may vary.
S 500 A
PROFESSIONAL
0 601 190 025
mm 1000
mm 255
mm 465 (*400)
mm 500
mm 152
mm 212
kg 12.5

English | 11