Table of Contents
Advertisement
Replacing rear turn
8
indicator bulbs
If it is not standing firmly,
122
the motorcycle could topple
in the course of the operations
described below.
Make sure that the motorcycle is
steady on its stand.
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
z
Remove screw 1.
Pull lamp housing on screw
connection side out of turn in-
dicator housing.
Press bulb 2 into fitting 3 and
remove it by turning it counter-
clockwise.
Replace defective bulb.
Bulbs for flashing turn
indicators, rear
R10W / 12 V / 10 W
Press the bulb 2 into the fit-
ting 3 and install it by turning it
clockwise.
Advertisement
Table of Contents
