CCS Technical Documentation
WCDMA TX Power Detector Tuning
This alignment requires use of a power meter ("thermal" sensor) or vector signal analyser.
The wideband mean power should be measured in a 5MHz BW.
•
Calibration is started from the Phoenix menu:
•
Press "Start" .
•
Tune the output power with the slider to +21 dBm. The power can be set with
either the slider or the arrow keys on the keyboard. Press "Accept"
Issue 1 11/03
Tunings/WCDMA/Power detector calibration
Copyright Nokia. All rights reserved..
NHM-1
Page 81