Rx Band Filter Response Compensation - Nokia NHM-1 Series Software Instructions
Ccs technical documentation service software instructions and service concepts
Hide thumbs
Also See for NHM-1 Series:
- Technical documentation manual (8 pages) ,
- Troubleshooting instructions (50 pages) ,
- Service manual (25 pages)
Table of Contents
Advertisement
NHM-1
RX Band Filter Response Compensation
•
RF generator needed
•
RX Band Filter Response Compensation starts at EGSM (GSM900),
then continues at GSM1800 band.
•
NOTE! Remember to do RX calibration before doing Rx Band Filter
Response Compensation!
•
Remember to take jig and cable attenuations into account!
Select Tuning => GSM => Rx Band Filter Response Compensation
Select "Manual tuning" and "Start"
You will be asked to supply 9 different RF frequencies to the phone
Set first required frequency and level => OK
Page 58
Copyright Nokia. All rights reserved.
CCS Technical Documentation
Issue 1 11/03
Advertisement
Table of Contents
