Table of Contents
Advertisement
Available languages
Available languages
Dear Customer
Thank you and congratulations on your purchase of the AXTON ATB20RXF. This active
subwoofer system exclusively uses very high quality parts and components. As with all
high-quality car audio components, professional installation is highly recommended.
If you plan on installing this active subwoofer by yourself, please read the following
installation guide carefully, before you attempt the installation. You should retain this manual,
the packaging and the purchasing receipt for future reference. For any further additional
information about mounting, connecting or adjusting this subwoofer system, please contact
your AXTON dealer.
UNPACKING THE SYSTEM
Carefully remove all parts from the giftbox and check whether they are in good undamaged
condition, and match with the set contents listed below:
ATB20RXF active subwoofer
n
Connector
n
Owner's manual
n
Please contact your authorized AXTON dealer, if the content of this set is incomplete,
or parts of it show signs of transport damage.
SPECIFICATIONS
8" / 20 cm active subwoofer
n
Frequency response: 35 – 145 Hz
n
100 W rms x 1 @ 4 ohms (< 1.0 % THD / 14.4V)
n
Variable lowpass filter: 50 – 150Hz / 12 dB/oct.
n
Bass-Boost: 0 dB - 12 dB
n
RCA, adjustable input sensitivity: 150 mV – 5 V
n
High-Level, adjustable input sensitivity: 1.0 V – 16 V
n
Signal to noise ratio: > 90 dB
n
Dimensions DxH: 580 x 125 mm
n
Net Weight: 11.6 kg
n
– 2 –
DIMENSIONS
580 mm
340 mm
Ø 580 mm
125 mm
– 3 –
Advertisement
Table of Contents
