Flycatcher smART Pixelator User Manual

USER MANUAL USER MANUAL
Activities Display Screen
Control Buttons
CONTROL BUTTONS
SIMPLE SET UP SIMPLE SET UP
1. Plug in the smART Pixelator™ AC Adapter (included) or insert 4 C batteries (not included).
2. Flip the switch on the back to turn on.
3. Insert the pre-loaded activity card into the back of the smART Pixelator ™ with the flat side facing up.
4. Place smART Pixel Beads tray (included) or Sequins or Pegs tray (sold separately) on the Pixelator surface.
5. After 15 minutes of no activity, the smART Pixelator™ lights will turn off. Reactivate using the buttons in the app or on
the Pixelator.
WARNING:
CHOKING HAZARD
Small parts
Not for children under 3 years
adapter:
AC
Tray holding pins
LED Indicators
Go Back a Step
Go to Home
Go Forward a Step
Next Drawing
Repeat Last Step/AutoPlay
Previous Drawing
For additional products or information on using
multiple trays, smART Pixel Pegs or Sequins, or
creating 3D designs, go to:
www.smartpixelator.com
CAUTION-
ELECTRIC TOY:
ot recommended for children
N
under years of ages.
3
all electric products, precautions
should be observed during handling
and use to prevent electric shock.
INPUT:100-240VAC, 0.3A MAX 50/60H
SD Activity Card
* 2 Battery
Compartments
(bottom)
s with
A
OUTPUT: 5.9V 1.0A
On/Off Switch
(back)
AC Adapter
connection (back)
SD Activity
Card Slot
Requires Android 5.0+
Requires Apple iOS 8.0+
z;