Flycatcher smART sketcher Projector User Manual

Content
Card Slot
Control Buttons
LED Indicators
Adjustable
Focus
Paper Holder
SIMPLE SET UP SIMPLE SET UP
1. Separate the blue projector head from the white base unit.
2. Insert blue unit into top of white base until you hear a click.
3. Plug the AC adapter (included) into the back of the unit and into
a power outlet. If you wish to use batteries instead, insert 4 D
batteries (not included) according to the directions below.
Enable "e ciency mode" by pressing the blue circle button for 2 seconds.
4. Pull out the blue legs to stabilize the projector and create a paper holder.
5. Flip the switch on the back to turn on the projector.
6. Insert the pre-loaded activity pack into the top of the projector.
7. After 10 minutes with no activity the projector light will
automatically turn o . Reactivate the light by using the buttons
in the app or on the projector.
For more fun, additional Creativity and Learn-A- Language
Alphabet Packs are available at: www.smartsketcher.com.
adapter:
AC
The toy should be periodically examined
for potential hazardous parts to be repaired or replaced.
CAUTION-
ELECTRIC TOY:
ot recommended for children
N
under years of ages.
3
all electric products, precautions
should be observed during handling
and use to prevent electric shock.
INPUT:100-240VAC, 0.3A MAX 50/60H
*Battery Compartment (bottom)
A
OUTPUT: 5.9V 1.0A
On/O Switch (back)
AC Adapter
connection (back)
Stability Legs
2s
s with
z;