Advertisement
3-2 Installing DRAIN HOSE 1
(1) Connect each end of 3DRAIN HOSE 1 to the drain port
on the unit and on the drain pump. (Fig. 5)
Insert the hose all the way to the end of the ports.
Do not use any adhesive.
(2) Secure the hose with 6HOSE BANDs at both ends of
the hose. (Fig. 5)
(3) Attach 4PIPE COVER 1 and 5PIPE COVER 2 to
3DRAIN HOSE 1 flush against each other and against
the unit and the drain pump, and then secure them in
place with C BANDs.
Wrap the pipe cover connection with vinyl tape to close
the gap. (Fig. 6)
3-3 Wiring connections
(1) Remove the CONTROL BOX COVER from the unit by
unscrewing the two screws on the cover. (Fig. 7)
(2) Unscrew the (c)CONTROL BOX fixing screw. (Fig. 7)
5PIPE COVER 2
To be gap-free
(c)
Fig. 7
4
6HOSE BAND
3DRAIN HOSE
Fig. 5
To be gap-free
C BAND 2
C BAND 2
Vinyl tape (locally procured)
4PIPE COVER 1
Fig. 6
CONTROL BOX
COVER
Advertisement
