Advertisement
3 Installing the Drain Pump
3-1 Installing the Drain Pump
(1) Unscrew the (a)screw on the unit cover, hook the
2ATTACHMENT over the mounting bracket on the unit,
and screw it on to the unit with the (a)screw. (Fig. 1)
(2) Temporarily screw in the 7SCREW in the hole (b) on
the 2ATTACHMENT. (Fig. 1 and 2)
(3) Loosen the drain-pump-cover fixing screws, and remove
the cover. (Fig. 3)
(4) Hang the 1DRAIN PUMP on the 2ATTACHMENT by
placing the 7SCREW (the one screwed in during Step
(2) above) through the Figure-8 hole on back of the
1DRAIN PUMP, and then tighten the 7SCREW from
inside the 1DRAIN PUMP. (Fig. 4)
2ATTACHMENT
1DRAIN PUMP
Cover
Cover fixing screws
Fig. 3
7SCREW
Hook the 2ATTCHMENT over the mounting bracket on the unit.
(b)
Fig. 4
3
Cover
(a)
Fig. 1
4~7mm
7SCREW
2ATTACHMENT
Fig. 2
Advertisement
