Table of Contents
Advertisement
BKPF-205/205R Connector Panel
AVM
SDI IN
1 SDI IN connector
ANALOG IN
AUDIO
1
2 ANALOG IN AUDIO connectors
2
3
4
SDI OUT
1
3 SDI OUT connectors
2
BKPF-205
1 SDI IN (serial digital video signal input)
connector (BNC type)
Accepts a 4:2:2 component or 4fsc NTSC composite
serial digital video signal.
2 ANALOG IN AUDIO (analog audio signal
input) connectors (XLR 3-pin)
Accept analog audio signals.
3 SDI OUT (serial digital signal output)
connectors (BNC type)
Output a signal obtained by multiplexing the audio
signals supplied to the ANALOG IN AUDIO
connectors with the serial digital video signals
supplied to the SDI IN connector and adding an EDH
process to the multiplexed signal.
Connectors 1 and 2 output the same signal.
The above figure shows the BKPF-205 which has
female-type ANALOG IN AUDIO connectors,
while those on the BKPF-205R are male-type
connectors. The other connectors and functions are
the same as those of the BKPF-205.
BKPF-206/206R Connector Panel
AVD
SDI IN
1 SDI IN connector
ANALOG OUT
AUDIO
1
2 ANALOG OUT AUDIO connectors
2
3
4
SDI OUT
1
3 SDI OUT connectors
2
BKPF-206
1 SDI IN (serial digital signal input) connector
(BNC type)
Accepts a 4:2:2 component or 4fsc NTSC composite
serial digital video signal on which digital audio
signals have been multiplexed.
2 ANALOG OUT AUDIO (analog audio signal
output) connectors (XLR 3-pin)
Output analog audio signals demultiplexed and
converted from the serial digital signal supplied to the
SDI IN connector .
3 SDI OUT (serial digital signal output)
connectors (BNC type)
Normally output the signal supplied to the SDI IN
connector after an EDH process.
The output signal contains the multiplexed audio
signals as-is.
Connectors 1 and 2 output the same signal.
The above figure shows the BKPF-206 which has
male-type ANALOG OUT AUDIO connectors,
while those on the BKPF-206R are female-type
connectors. The other connectors and functions are
the same as those of the BKPF-206.
9 (E)
Advertisement
Chapters
Table of Contents
