Location and Function of Parts
BKPF-106A Connector Panel
AVD
SDI IN
1 SDI IN connector
2 Active-through output connector
AES/EBU OUT
1
3 AES/EBU OUT connectors
2
SDI OUT
1
4 SDI OUT connectors
2
BKPF-106A
1 SDI IN (serial digital signal input) connector
(BNC type)
Accepts a 4:2:2 component or 4fsc NTSC composite
serial digital video signal on which AES/EBU digital
signals have been multiplexed.
2 Active-through output connector (BNC type)
Outputs the signal supplied to the SDI IN connector
after its waveform has been shaped.
3 AES/EBU OUT (digital audio signal output)
connectors (BNC type)
Output AES/EBU digital audio signals demultiplexed
from the serial digital signal supplied to the SDI IN
connector.
Connector 1: Channels 1/2 (5/6 in group 2, 9/10 in
group 3, or 13/14 in group 4)
Connector 2: Channels 3/4 (7/8 in group 2, 11/12 in
group 3, or 15/16 in group 4)
8 (E)
4 SDI OUT (serial digital signal output)
connectors (BNC type)
Normally output the signal supplied to the SDI IN
connector after an EDH process.
The output signal contains the multiplexed audio
signals as-is.
Connectors 1 and 2 output the same signal.