Maintenance
■
Tool should be kept free from dust, dirt and foreign particles
were possible.
■
Routine application of rust preventive oil / grease to the product is
periodically required and should be applied liberally to the
surface of the tool.
■
Avoid bringing the tool into contact with water or solvents.
■
Do NOT store this product in places with high temperatures, high
humidity, or direct sunlight. Hydraulic fluid temperatures over
65ºC might cause damage to components sealed inside the unit.
■
working temperatures:-10°C ~ 40°C.
■
Before storage ensure that the ram and piston are fully retracted
within unit.
■
DO NOT ATTEMPT TO REPAIR THIS TOOL Inform Partex or
their authorized distributors.
ISSUE: 10/13 ORIGINAL
PAGE 4