Setting Production Counter; Setting Number Of Trimming Times Displayed - Brother MD-600 Series Product Manual

2.3 Setting production counter

★ The production quantity can be displayed on the F-40 or F-100 panel.
2.3.1 How to set the production counter
(1) While pressing the FUNC key, press the D△ key. [dM.**
dM.PC] with the C△ key or D△ key. dM.PC dM.PC
(2) Set to [dM.PC
(3) Press the SET key two or more seconds.
2.3.2 How to set the production quantity counter input
★ (Example) When setting IN1-IN4 in the production counter function.
(1) While pressing the FUNC key, press the C△ key. [L1.**
(2) Select the item [i1.**
(3) Set the signal to [i1.Ct
(4) Select the item [i2.**
(5) Set the signal to [i2.CU
(6) Select the item [i3.**
(7) Set the signal to [i3.Cd
(8) Select the display [i4.**
(9) Set the signal to [i4.CC
(10) Press the SET key two or more seconds.
The display changes to the production counter display when IN1 signal is turned ON.
The count display [ABCD] on the panel increases when the IN2 signal is turned ON.
The count display [ABCD] on the panel decreases when the IN3 signal is turned ON.
The count display [ABCD] on the panel is cleared to "0000" when the IN4 signal is turned ON.
2.4 Setting the number of trimming times displayed
★ The number of trimming times can be displayed on the F-40 or F-100 panel.
2.4.1 How to set the number of trimming times displayed
(1) While pressing the FUNC key, press the D△ key two or more seconds. [dM.**
dM.tC] with the C△ key or the D△ key.
dM.tC dM.tC
(2) Set to [dM.tC
(3) Select the item [tn.**
(4) Set the number of trimming times count unit (1-99 times) with the C△ key and the D△ key.
★When the number of trimming times is set to "10", it is counted every 10 times.
(When it is set to "00", the counter will not count.)
CM.**] with the A △ key or the B△ key.
CM.** CM.**
(5) Select [CM.**
(6) Set the count direction (count up/count down) with the C△ key or D△ key.
(7) Press the SET key two or more seconds.
2.4.2 How to set the number of trimming times counter input
★ (Example) When setting IN1-IN4 in the thread trimming counter function.
(1) While pressing the FUNC key, press the C△ key two or more seconds. [L1.**
(2) Select the item [i1.**
(3) Set the signal to [i1.Ct
(4) Select the item [i2.**
(5) Set the signal to [i2.CU
(6) Select the item [i3.**
(7) Set the signal to [i3.Cd
(8) Select the item [i4.**
(9) Set the signal to [i4.CC
(10) Press the SET key two or more seconds.
The display changes to the display for the number of trimming times when IN1 signal is turned ON.
The count display [ABCD] on the panel can be modified when the IN2 or IN3 signal is turned ON.
The count display [ABCD] on the panel is cleared to "0000" when the IN4 signal is turned ON.
★ The number of trimming times is counted by the thread trimming operation.
Product manual for MD621/631 2001. 6.15
From the library of Superior Sewing Machine & Supply LLC - www.supsew.com
i1.** i1.**] with the FUNC key. i1.**
i1.Ct] with the C△ key or the D△ key. i1.Ct i1.Ct
i2.**] with the A △ key or the B△ key. i2.** i2.**
i2.CU i2.CU] with the C△ key or the D△ key. i2.CU
i3.** i3.** i3.**] with the A △ key or the B△ key.
i3.Cd i3.Cd] with the C△ key or the D△ key. i3.Cd
i4.** i4.** i4.**] with the A △ key or the B△ key.
i4.CC i4.CC] with the C△ key or the D△ key. i4.CC
tn.**] with the A △ key or the B△ key.
tn.** tn.**
i1.**] with the FUNC key..
i1.** i1.**
i1.Ct] with the C△ key or the D△ key.
i1.Ct i1.Ct
i2.**] with the A △ key or the B△ key.
i2.** i2.**
i2.CU] with the C△ key or the D△ key.
i2.CU i2.CU
i3.**] with the A △ key or the B△ key.
i3.** i3.**
i3.Cd] with the C△ key or the D△ key.
i3.Cd i3.Cd
i4.**] with the A △ key or the B△ key.
i4.** i4.**
i4.CC] with the C△ key or the D△ key.
i4.CC i4.CC
- 18 -
dM.**] will appear on the panel. dM.** dM.**
L1.**] will appear on the panel. L1.** L1.**
dM.**] will appear on the panel.
dM.** dM.**
L1.**] will appear on the panel.
L1.** L1.**