Advertisement
INSTALLATION
1.
Begin with the car parked, with the ignition off.
2.
Insert the MicroSD card into the recorder slot.
Note:
Please use a high-speed MicroSD card (Class 10 or above) with capacity no less than
512MB. The device supports microSD cards up to 64GB.
3.
Fix the recorder near the original mirror of the car or on the centre of the windshield.
4.
Insert the car charger into the car cigarette lighter.
5.
Connect the USB port of the recorder to the car charger with a charging extension
cable.
Note: When wiring, the charging extension line can be laid along the edge of the
car windshield.
6.
Install the rear camera on the rear windshield or under licence plate. Pay attention
to the direction when installing. The wiring can be laid along the roof of the vehicle.
After the installation is complete, connect the rear plug to the recorder's rear
camera interface.
7.
Adjust the position of the lens to ensure that the lens is level with the ground.
8.
Start the engine and check whether the machine has been installed correctly.
Note:
When the recorder is installed correctly, the "system working" indicator lights up, the
machine begins recording, and the "recording" indicator flashes.
Advertisement
