Advertisement
Date and time setting
•
In standby mode, short press "Menu" key to enter the system setting menu, short
press "Up" and "Down" keys to navigate to Date option and short press "OK" key to
enter. Press the up and down keys to adjust the date and time and press the mode
key to switch the year, month, day and time cursors.
Note:
To effectively record the date and time of the certification of driving safety accidents,
please set the correct time before using the device.
One-key mute function
•
While the device is on, short press "Down" key; the microphone at the upper left of
the screen will be crossed out, indicating that the video recording function has
been turned off. At this time, the recorder only records images but not sound. When
you press the "Down" key again, the crossed-out microphone icon changes back to
the recording icon.
•
Hint: The settings will be saved automatically and there is no need to set the mute
function after turning on again.
U disk mode
•
Connect the recorder to the computer USB interface through the data cable; the
screen displays the disk, camera, and video modes. Use "Up" key and "Down" keys
to select the disk option, then short press "Confirm" key to enter the U disk mode.
Shooting file playback
•
While the device is on, short press "Mode" key twice to switch to playback mode.
Short press "Up" key / "Down" key to find the file to be played back, short press
"Confirm" key to play. To exit playback mode, short press "Mode" key again.
Parking monitoring
•
When the parking monitoring function is turned on, if the car has a slight vibration
while turned off, then the recorder will automatically start recording. It will record for
30 seconds and then shut down.
Advertisement
