APP INSTALLATION
This dash camera uses the Roadcam app to take photos and view recorded footage.
1. Scan the QR code below on your mobile device and follow the prompts to download
the Roadcam app.
2. Press and hold the power/OK button to turn on the dash camera.
3. Turn on the Wi-Fi on your mobile device, then enter the Wi-Fi settings. Search for the
'AP_WIFI' network and tap to connect (password: 12345678).
This Wi-Fi network does not have internet access. If your mobile device prompts a
warning regarding no internet access on the Wi-Fi network, tap 'Connect'. If this is
not tapped, you will be unable to access the Roadcam app.
Note:
Do not change the Wi-Fi password.