Advertisement
1. Remove the 2 screws underneath the air
2. Pull the trim off starting at the BOTTOM. Pull
conditioning panel
gently as you will need to disconnect the plugs
from the back of the air conditioning panel
3. Remove all plugs from the back of the air
4. Remove 8 screws to access the back of the
conditioning control panel, remove trim
monitor and head unit
and set aside
5. On the back of the OEM monitor, remove linking
6. Keep this cable in case you ever want to revert
cable.
back to factory standard.
5
Advertisement
Need help?
Do you have a question about the Sync 3 and is the answer not in the manual?