Advertisement
How to pull the dash apart to access OEM Head Unit & Screen—
This is the recommended order to pull the dash apart:
Please see individual photos below corresponding with their number above:
1
1. Pull out right hand
side small panel
3
3. Remove entire panel
Ford Ranger / Everest
2
2. Pull out left hand
side small panel
3
3. Put trim tool
underneath the long
panel attached to left of
OEM screen air vent and
pop out
4
4. Remove right of OEM screen air vent
3
3. Put trim tool under
left of OEM screen air
vent and pop out
4
3
Advertisement
Need help?
Do you have a question about the Sync 3 and is the answer not in the manual?