Installation Notes - Polaris Sync 3 Installation And User Manual

Installation Notes


This module is to suit the Sync 3 Ford screens.

The wiring and installation of this unit requires special technical skill and experience. If you do
not feel confident installing this product or do not have the level of skill necessary, please
contact Polaris on 1300 555 514 so we can refer to a recommended installer.

To avoid short circuit in the electrical system, ensure that the negative battery cable is
disconnected before installation.

To avoid possibility of shorting out the electrical circuit in the unit, never connect the battery
wire directly to the vehicle battery.

Always secure all wirings with cable clamps or adhesive tape to prevent short circuit.

Please make sure all wiring connections are well insulated.

When pulling the dash apart, please use quality trim tools to avoid damaging your dash.

Please do NOT cut any plugs off of any Polaris cables. Doing so will void your warranty! If you
need to blend other brand cameras into our system, please call Polaris on 1300 555 514 so we
can refer you to a recommended dealer who has the skill and experience in performing this type
of work.

Please do NOT cut any plugs off of any of your OEM Ford Cables as you will void your warranty
with Ford.

If there is something you are not 100% sure about when installing this unit, please give our
experienced technicians a call on 1300 555 514.
Videos
How to pull the Ranger / Everest dash apart and install the module:
http://y2u.be/I4dGAyTMh6A
Camera Activation for Ford Ranger 2016—2021
http://y2u.be/EJgQS027tq0
Camera Activation for Ford Everest 2016—2021
http://y2u.be/IgRAkEB_yZE
2