Advertisement
Blake UK and PROception
distribution system. Model Reference Description PROAMP12R 2 way Amplifier with
Return Path - Single Input PROAMP24R 4 way Amplifier with Return Path - 2 Seperate
Inputs UHF TV & FM/DAB PROAMP26R 6 way Amplifier with Return Path - 2 Seperate
Inputs UHF TV & FM/DAB PROAMP28R 8 way Amplifier with Return Path - 2 Seperate
Inputs UHF TV & FM/DAB PROMHD14R External 4 Way Masthead Amplifier with
Return Path PROAMP104X Dual Mode 4-Way Amplifier, Line Powered with Return
Path PROAMP310X Dual Mode 10-Way 3-Band Amplifier (3 Inputs UHF TV, FM& DAB),
Local & Remote Powered Options with Return Path PROSTR5S 5 way starBOX Home
5+1-Way RF Network Hub. (5 Inputs Sky+, UHF TV, FM, DAB, Auxillary for CCTV)
PROSTR10S 10 way starBOX Home 5+1-Way RF Network Hub. (5 Inputs Sky+, UHF
TV, FM, DAB, Auxillary for CCTV)
TECHNICAL INFORMATION
General Signal
frequency range 87.5 - 862 MHz (Bands II-V) Insertion loss 1.5 dB Return path signal
frequency 7 MHz Signal connections Input 'IEC' female socket; output 'IEC' male on
short flying lead DC power requirement 9 V nominal at approx. 5 mA (operable over
5.5 - 18 V) Troubleshooting Turning on RF-2 Out on Sky Boxes
Standard Sky Box (Sky, Sky+)
New Sky Box (Sky+
HD)
Press the SERVICES button once. Press the NUMBER 4 button -
(System Setup). Press the 0 (ZERO) button, then the NUMBER 1 button, then the
SELECT button - (Installer Menu). Press the NUMBER 4 button again - (RF Outlets).
Press the DOWN ARROW button once - (Outlet Power Supply). Press the SIDE ARROW
button once to turn the power supply to ON. Press the DOWN ARROW button once
again - (Save New Settings). Press SELECT to finish the set-up. Press SKY to exit the
menu. Press the SERVICES button once. Press the RIGHT ARROW button once
(Settings), then press SELECT. Press the 0 (ZERO) button, then the NUMBER 1 button,
then the SELECT
button - (Setup). Press the RIGHT ARROW button
three times - (RF Outlets). Press the DOWN ARROW button twice - (RF Outlet Power
Supply). Press the SIDE ARROW button once to turn the power supply to ON. Press
the GREEN BUTTON to finish the set-up. Press SKY to exit the menu. Other assistance
in trouble shooting. Ensure that any amplifier system is either a DUAL MODE
PROCEPTION amplifiers, part numbers ending with an X and the RETURN
PATH amplifiers ending with an R are fully compliant and will pass the Return Path
Infra Red signal controls throughout the distribution system. For other manufacturers
products please refer to the manufuture's guide to ensure is compliant. Proof out the
cables and the amplifiers by fitting the PROSAT1EYE directly on the RF2 output of an
old style Skybox or for a new style Skybox via an I/O link product. Ensure the RF-2
Out is turn on as above. Cover the front of the Skybox so the signal from the remote
control is ONLY received via the PROSAT1EYE fitted at the rear of the box. If the box
works then the problem lies in the cabling amplification of the system. Find out more
about
using
this
product
with
the
New
Sky
Boxes
Introducing
the
PROception proLINK22 'RF replicator' New Sky set-top boxes such as the DRX595 and
DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-
loopthrough facilities have been replaced with the new 'I/O PORT' – a small round
connector (10- pin mini-DIN) which allows an external 'RF replicator' (modulator) unit
to provide similar distribution functions. Applicable to the following models
proAMP12R
proAMP104X
proAMP24R
proAMP310X
proAMP26R
proMHD14R
proAMP28R proSAT1EYE proSTR5M proSTR10CRS proSTR5S proSTR10S
Advertisement
