Advertisement
Quick Links
PROception
SUPPLEMENTARY INSTALLATION INSTRUCTIONS
Introducing the PROception proLINK22 'RF replicator'
New Sky set-top boxes such as the DRX595 and
DRX890W do not have the familiar aerial input,
RF-1 and RF-2 connectors. These RF-loop-
through facilities have been replaced with the
new 'I/O PORT' – a small round connector (10-
pin
mini-DIN)
'RF replicator' (modulator) unit to provide similar
distribution functions.
Features of the PROception proLINK22 RF Replicator
■ Flying lead plugs directly into the Sky I/O port.
■ Replaces the 'missing' RF facilities on new-style Sky boxes.
■ Compatible with all PROception return-path and dual-mode amplifiers (listed above).
■ RF loop-through for Freeview and VHF radio (replaces Sky AERIAL IN connector).
■ Integral modulator, output channel 21-60, simple to configure in Sky menu.
■ Remote control capability on both RF outputs, supports two remote outlets with IR
eyes (where no local RF output is required).
■ External power supply option for larger systems using proAMP104X, proAMP310X
and proMHD14R amplifiers.
12 V
* See notes overleaf to determine whether an external power unit is required.
which
allows
an
I/O
PROception
proLINK22
'RF Replicator'
Using This Product
with the New Sky Boxes
Applicable to the following models
proAMP12R proAMP104X
proAMP24R
proAMP26R
external
proAMP28R
How to use the PROception proLINK22
This instruction sheet should be read in
conjunction with the instruction leaflets
for the return-path amplifier and for
the proLINK22. The following notes are
RF
a quick guide.
IN
■ Simply plug the flying lead into the
I/O port of the Sky box.
RF
■ Enable power and set the desired
OUT1
modulator RF channel using Sky
Setup menu (key SERVICES, 0, 0, 1,
RF
SELECT).
OUT2
■ Where
return-path or dual-mode amplifier
show a connection to RF OUT-2 of a
Sky box, connect to an RF output of
the proLINK22 instead.
■ Where necessary*, connect a mains
power unit type proPSA125 to the
proLINK22.
proAMP310X
proMHD14R
proSAT1EYE
the
instructions
for
the
Page 1
Advertisement
Related Manuals for PROception proLINK22
Summary of Contents for PROception proLINK22
- Page 1 ■ Flying lead plugs directly into the Sky I/O port. ■ Replaces the ‘missing’ RF facilities on new-style Sky boxes. ■ Compatible with all PROception return-path and dual-mode amplifiers (listed above). ■ RF loop-through for Freeview and VHF radio (replaces Sky AERIAL IN connector).
- Page 2 Power supply notes ■ The proLINK22 itself is always powered from the Sky box , via the I/O cable. ■ An additional power unit is only required where necessary to power a distribution amplifier – see the table below and the application example diagrams in the proLINK22 instruction leaflet.