Advertisement
Available languages
Available languages
CD SECTION
CD PLAYING
1. Press FUNCTION button to CD.
3. The total number of
tracks and playback
time will show in
the display for a
few seconds.
4. To start playing, press play button.
2. If the unit is in the
horizontal position,
insert the CD with
the label side facing
up.
If the unit is in the
vertical position,
insert the CD with
the label side facing
right.
TO INTERRUPT PLAYBACK
NOTE
Press
button.
The CD player may skip if the loud speakers are
situated close to the player and if high volume or
The pause indicator
will light up.
bass levels are used.
To resume playback, press
button again.
TO STOP PLAYBACK
This unit only plays 5" CDs.
Press
button.
Locating a particular point in a track
Searching for the beginning of a track
To move backward at high speed
To find a previous track
Keep
SKIP/PRESET button pressed during
Keep
play and release at the desired point.
to the beginning of the current traack.
To move forward at high speed
To skip tracks
Keep
SKIP/PRESET button pressed during
Keep
play and release at the desired point
skip track(s) forward one by one.
BACKWARD
BACKWARD
FORWARD
Keep it pressed during play
REPEAT PLAY
RANDOM PLAY
This function will allow a single track or all the
Tracks on the disc can be played in random order.
tracks on the disc to be played repeatedly.
Playing in a random order - in stop mode
To repeat the same track
1. Press the Random
button, the word
Press REPEAT button to repeat the current track.
RANDOM
The repeat indicator light up.
appear on the
display.
To repeat the whole disc
Press REPEAT button until
the indicator light up.
Notes:
1. The random function shuffles all the tracks and
To cancel repeat play
randomly selects one track to play each time.
Press REPEAT until the repeat indicator turn off.
2. The player will skip to a new randomly selected
track and start playing if skip button is pressed
During stop mode
during random playback.
The repeat operations can also be done in
In playback mode
the stop mode. The player will start playing
During normal playback the random function cannot
from Track 1 of the currently selected disc
be activated. It can be switched ON from the STOP
after play/pause button is pressed.
mode.
To cancel random playback
During pause mode
1. Press the stop button to stop random playing.
The repeat operations can also be done from
2. Press the RANDOM button to deactivate random
the pausing point. The player will start
playback.
playing again after play/pause is pressed.
NOTE
During random playback, the RANDOM playback
function cannot be cancelled. Random play
cancellation can only be done in stop mode.
PROGRAMMING PLAYBACK – IN THE STOP
MODE
Up to 32 tracks can be programmed to play in an
order using this function
1. Press MEMORY /
CLOCK button (in
stop mode).
3. Press memory button again to store this track
in memory.
4. To program additional tracks:
Repeat step 2 to 3.
5. To start playback, press the play button
NOTE
With program on, the skip button function can
only be used for the selected tracks.
To check the program
Press memory button successively to check the
sequence of programmed tracks.
SLEEP SETTING
When the sleep timer is used, the power is
automatically turned off after the specified
time passes.
SKIP/PRESET button once to return
1. Press the sleep button
while the power is on.
Sleep 90 lights in the
display
2. Press and hold the
SKIP/PRESET button repeatedly to
SLEEP button to select
the
length
remaining time until
the unit turns off.
FORWARD
The sleep timer is set and the SLEEP indicator
lights in the display. Let go when required sleep
time (in minutes) is shown.
To cancel the sleep timer, press the SLEEP
button once and SLEEP will go out in the
display.
Press it once
VERTICAL OR HORIZONTAL
2. Press the play/pause
This system is specially designed to work
button. Some abnormal
in a vertical or horizontal position.
will
symbols will be shown
on the display and a
short period of time is
For proper operation, make sure the unit
needed
for
tracks
is placed on a flat stable surface.
shuffling
before
playback can be started.
SPECIFICATIONS
Power Source:
Power consumption:
Speaker impedance:
Accessories:
Specifications subject to change without notice.
STOPPING AND CANCELLING
PROGRAMMED PLAYBACK
To stop programmed play for a moment:
• Press
play/pause button and
displayed. Press this button again to resume
2. Press skip button to
playing.
select the desired
track
To add additional tracks during program
playback:
• Press
stop button, press the
CLOCK button until the track indication is
"--" and then repeat steps 2 to 3
(programmable playback).
To erase the whole program:
• Press
stop button
until
the
word
MEMORY disappears
from the display. The
display will then show
the information of the
current disc.
• Or press the FUNCTION
button to select other
functions.
ADJUSTING THE SOUND
To adjust the volume
Slide the volume knob to
clockwise or anti-clockwise
to increase or decrease the
volume.
For loud deep bass
of
Press X-BASS button to increase the low
frequency sound level.
For private listening
Connect a headphone (ø3.5mm stereo mini-
plug) to the PHONES jack. When the
headphone is connected, speakers are
automatically disconnected.
AC 120V ~ 60 Hz
36 Watts
4 ohms
1 main unit
2 x 4 ohm 1-way system speakers
1 x 4 ohm subwoofer with display power meter
1 Remote controller with 2xAAA batteries
1 FM antenna
1 AM loop antenna
811-650191-042
will be
Instruction Manual
MEMORY/
The lightning flash
WARNING: TO REDUCE THE RISK
and arrowhead within
OF ELECTRIC SHOCK, DO NOT
the triangle is a
REMOVE COVER (OR BACK), NO
warning sign alerting
USER-SERVICEABLE PARTS INSIDE.
you of "dangerous
REFER SERVICING TO QUALIFIED
voltage" inside the
SERVICE PERSONNEL.
product.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CLASS 1 LASER PRODUCT
CLASS 1
LASER
PRODUCT
This product contains a low power laser device.
TROUBLE SHOOTING GUIDE
SYMPTOM
CD
System does not turn on
Disc in place but until won't play
Disc skips
RADIO
Poor FM reception
Poor AM reception
MAINTENANCE
CLEANING CD
If the CD skips or will not play, the disc may
need cleaning. Before playing, wipe the disc
from the centre out with a cleaning cloth. After
playing, store the disc in its case.
Made in China
SLOT-IN CD
SLOT-IN CD
SLOT-IN CD
SLOT-IN CD
SLOT-IN CD
MICRO SYSTEM
MICRO SYSTEM
MICRO SYSTEM
MICRO SYSTEM
MICRO SYSTEM
WITH SUB-WOOFER
WITH SUB-WOOFER
WITH SUB-WOOFER
WITH SUB-WOOFER
WITH SUB-WOOFER
WARNING
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The exclamation point
within the triangle is
a
warning
sign
alerting
you
of
important instructions
accompanying
the
product.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO BEAM.
CAUSE (AND REMEDY)
• Make sure AC power plug is secure in the outlet,
and outlet has power.
• Make sure FUNCTION selector is set to CD.
• Make sure disc label is facing up.
• Make sure disc is clean.
• Pause mode is activated.
• Press and hold EJECT button for 3 seconds to eject
the disc, take it away from disc tray then inset again.
• Disc may be damaged or dirty; check disc.
• Make sure the unit is on a secure spot. Vibration or
jarring can cause the disc to skip.
• Make sure FM antenna wire is unwind.
• Electrical interference in your home can cause poor
reception. Move the unit away from sources of
interference (especially those with motors and
transformers).
• Reposition or turn the unit for better reception.
CLEANING THE UNIT
Do not use volatile chemicals on this unit. Clean
by lightly wiping with a soft cloth.
IMPORTANT NOTE
Before transporting the unit, take out all discs
from the CD tray.
Advertisement
