Advertisement
Energy Meter Setup Guide
1. Install the Energy Meter at your electrical distribution board (DB) per the above diagram.
2. Open Maevi Smart Home App and go to "Home Automation" tab, click "+" button at the
bottom right corner of the app to start the pairing process.
3. The Gateway will now start searching for new devices to be paired with. Immediately, single
press the Reset button on the Energy Meter to complete the process.
Tip: You can also press and hold the "Z" button on the gateway for 2 seconds until LED
indicator turns steady blue to permit joining device. Single press "Reset" button on the Energy
Meter to pair with the Gateway.
To Pair Device
Advertisement
