Updating Your Device Using the Garmin Drive App
The Garmin Drive app notifies you when a software update or a safety camera database update is available for
your device.
1 In the Garmin Drive app, select Install Now.
The software update is sent to your device. You are notified when the transfer is complete.
2 Disconnect the device from power until the device turns off.
3 Connect the device to power.
The device installs the software update.
NOTE: Footage is not recorded while the software is updating.
Garmin Support Center
Go to
support.garmin.com
videos, and customer support.
Viewing E-Label Regulatory and Compliance Information
1 From the settings menu, scroll to the bottom of the menu.
2 Select System.
3 Select Regulatory.
Restarting the Device
You can restart your device if it stops functioning.
Hold the power key for 12 seconds.
Specifications
Operating temperature range
Charging temperature range
Input voltage
Wireless frequencies
Memory Card Specifications
The camera requires a memory card with these specifications. Go to
of recommended memory cards.
Type
Capacity
Speed class
File system
Constant Power Cable
The Constant Power Cable is an always-on, 12V power adapter that connects to the OBD II port in your vehicle.
The device can power up to two dash cameras for a selected length of time after you turn off your vehicle.
For more information, or to purchase a Constant Power Cable, go to garmin.com.
Appendix
for help and information, such as product manuals, frequently asked questions,
From -20° to 60°C (from -4° to 140°F)
From 0° to 45°C (from 32° to 113°F)
From 4.75 to 5.25 Vdc, 1 A
2.4 GHz @ 16 dBm maximum
microSDHC or microSDXC
8 GB or greater
Class 10 or higher
FAT32
Appendix
garmin.com/dashcamcards
to view a list
19