Advertisement
Available languages
Available languages
NAMES OF CONTROLS
1
2
3
4
5
6
1. CD REPEAT
button
2. CD display
Track number
Play " " indicator
Pause "
" indicator
Repeat all " " indicator
Repeat one "
3. CD PLAY / PAUSE
button
4. CD STOP
button
5. CD SKIP
button
6. CD SKIP
button
7. Handle
8. Fixed antenna
9. Tuning control
POWERING UP
AC POWER
You can power your portable stereo system by plugging the detachable
AC power cord into the AC inlet on the back of the unit and into a wall
AC power outlet.
Check that the rated voltage of your unit
matches your local voltage. Make sure that
the AC power cord is fully inserted into the
unit.
Caution:
To prevent electrical shock,
match wide blade of plug to
wide slot, fully insert.
BATTERY POWER
Insert 8 "C" size batteries in the battery compartment. Be sure that the
batteries are inserted correctly to avoid damage to the unit.
• Always remove the batteries when unit will not be used for a long
period of time, as this will cause leakage to the batteries and
subsequently damage to your unit.
• Playback would automatically come
to a stop when the batteries have no
more power. Replace all the batteries
with new ones.
• Do not mix old and new batteries.
Do not mix ALKALINE, standard
(CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
ADJUSTING THE SOUND
VOLUME
Adjust the VOLUME control of the stereo system to a desired level.
For private listening
Connect headphones (Ø3.5 mm stereo mini-plug) to the PHONES
When headphones are connected, speakers automatically disconnected.
10
11
12
10. CD door
11. Cassette deck
operation controls
PAUSE button
II
STOP button
F.FWD button
REW button
PLAY button
" indicator
RECORD button
12. Cassette compartment
13. FUNCTION switch
14. BAND switch
15. VOLUME control
16. PHONES
jack
17. AC socket
18. Battery compartment
To AC inlet
To wall AC outlet
1
.5V
1
.5V
1
.5V
1
.5V
You can listen to your favourite radio stations by sliding the FUNCTION
switch to RADIO, and then
7
1. Slide the BAND switch to choose AM(MW) or FM.
8
2. Using the TUNING control to choose a desired station.
9
•
Adjust the VOLUME.
AM(MW)
• Repositioning the unit to get better
AM(MW) reception.
Note: After listening, slide the
FUNCTION switch to TAPE.
1. Slide the FUNCTION switch to CD. "
2. Open the CD door. Place a disc in the center with the label side up
13
and then close the CD door gently. The total number of tracks will
show in the display.
14
3. Press the CD PLAY/PAUSE
" " indicator will light.
15
• Adjust the VOLUME.
TO STOP PLAYBACK
• Press the CD STOP
TO INTERRUPT PLAYBACK
• Press the CD PLAY/PAUSE
16
play (the CD PAUSE "
• Press the CD PLAY/PAUSE
17
TO SKIP TO THE BEGINNING OF A TRACK
18
• Press either one of the CD SKIP
direction. Each press skips one track. During play, the first press on the
skip backwards
• Playback resumes from the selected track.
TO SEARCH THROUGH TRACKS
• Keep either one of the CD SKIP
the desired direction, and release at the desired point.
REPEAT PLAY -- in play modes
This function allows one track and all tracks on a disc only to be played
repeatedly.
TO REPEAT THE SAME TRACK
• Press the CD REPEAT button once during playback, the REPEAT ONE
"
TO REPEAT THE WHOLE DISC
• Press the CD REPEAT button a second time to repeat all tracks, the
REPEAT ALL " " indicator will light.
TO CANCEL REPEAT PLAY
• Press the CD REPEAT button until the REPEAT indicator is turned off.
Note: Repeat play can only be done when the unit is in the play mode.
TAPE PLAYBACK
1. Slide the FUNCTION switch to TAPE.
2. Insert a cassette tape.
3. Press the cassette of PLAY
TO STOP PLAYBACK
• Press the cassette of STOP
TO FAST WIND
• Press the cassette of F.FWD
• Press the cassette of STOP
position.
RECORDING
USE ONLY NORMAL ( TYPE I ) TAPE FOR RECORDING.
1. Insert a cassette tape.
1
.5V
2. Prepare the source to be recorded and play it.
1
.5V
RECORDING FROM THE RADIO
1
.5V
1
.5V
3. Press the cassette of RECORD
of PLAY
TO STOP RECORDING
Press the cassette of STOP
WHEN THE END OF THE TAPE IS REACHED
The tape stop and the buttons are released automatically. To record on the
other side, turn the cassette over and press the cassette of RECORD
again.
TO ERASE A RECORDED TAPE
1. Slide the FUNCTION switch to TAPE.
jack.
2. Insert a tape with the side you want to erase facing you.
3. Press the cassette of RECORD
RADIO OPERATION
USING THE CD PLAYER
button to start CD play. The CD PLAY
button to stop disc play.
button while a CD is playing to pause
" indicator will blink).
button again to resume play.
or
button to the beginning of the current track.
" indicator will blink.
USING THE CASSETTE COMPARTMENT
button.
button.
or
button to stop winding at the desired
( Refer to radio operation )
button which also engages the cassette
button. Recording starts immediately.
button.
button to start erasing.
" is shown in the display.
button according to the desired
or
button pressed, according to
REWIND button.
RECORDING FROM A CD
( Refer to CD play )
button
Advertisement
