Installation; Removing The Base Stand; Mounting On The Wall - Audiovox FPE1708 Owner's Manual

17” hd flat panel lcd tv

Table of Contents

WARNING: The LCD Display is very fragile, and must be protected at all times when removing the base

stand. Be sure that no hard or sharp object, or anything that could scratch or damage the LCD display,

comes into contact with it. Do NOT place pressure on the front of the unit at any time because the screen

could crack.

1. Disconnect any cables or cords connected to the unit.

2. Lay the unit down on a ﬂ at surface, so the backside is facing up, making sure to place a soft cushioned

material (such as a pillow or thick piece of foam) beneath the screen.

3. Remove the four screws and then remove the BASE STAND from the TV.

This unit is VESA-compliant, and is designed to be wall-mounted with a VESA-compliant 3 15/16" x 3 15/16"

(100mm x 100mm) mounting kit designed for ﬂ at-panel TVs (sold separately). Mount this unit according to

the directions included with the mounting kit.

NOTE

Remove the base stand before mounting the unit on the wall.

FPE1708_UL_IB_MSTAR+MTK_E1-18.indd 11

INSTALLATION

E - 11

3/14/2008 5:17:10 PM

Table of Contents