Audiovox FPE1505DV Operating Manual page 31

Playback Functions
Switching On and Off, Stand-by
Connect the main cord to a wall outlet with a
voltage corresponding to the specifications on
the rear panel of the unit.
1. Press the POWER button on the top panel
to switch on the unit. You can also operate
all functions using the remote control (r/c).
Additionally, many functions have buttons
at the unit as well.
2. Press the SOURCE button to select
DVD-Mode.
If no disc is inserted yet, the display will
display the OSD:
3. To set the unit into standby mode, press
the POWER button on the r/c. In standby
mode the unit is supplied with main
voltage but not active. In this condition
you can switch on the unit using the
POW ER button on the r/c.
4. Correctly put the disc into the disc tray
(label facing you).
5. Playback starts automatically, usually
DVD discs now shows a menu to choose
from. You can control this menu with the
direction buttons.
Select the desired option and press the
OK to activate it. Mostly you find
additional information about the DVD's
content o
6. To interrupt playback press the STOP
button once. The screen shows STOP
[Play to resume]. Press the PLAY button
to resume playback from position where it
was stopped.
If you press the STOP button twice the
unit completely
remember the
If this symbol appears on the screen while
pressing a button it indicates that the
selected button is not supported by either the
DVD inserted or the current operating m
- 30 -
n its sleeve.
stops
last position.
and won't
ode.