Computer Screen Function - Audiovox FPE1505DV Operating Manual

Computer Screen Function

This unit's TFT LCD display may be used as your computer's monitor. Access the computer setup
menu and follow the steps shown below:
1. Turn off power to the unit and the computer. Connect this unit to the computers VGA port using a
VGA cable.
2. Apply power to the unit and the computer.
3. Press the SOURCE on the remote control to select the "PC" mode;
Press the SCREEN SETUP button once on the remote control to access the PC's setup menu:
Press the ▼, ▲ button to highlight Bright, press the ►, ◄ button to adjust the desired value.
Bright: This setting allows the user to adjust the picture brightness to the desired level.
Contrast: This setting allows the user to adjust the picture Contrast to the desired level.
Auto: This setting automatically adjusts the display zone and the picture quality.
Clock: This setting allows the user to enlarge or reduce the display horizontal size.
Phase: This setting allows the user to adjust the picture quality.
H. Position: This setting allows the user to adjust the display zone left and right horizontal position.
V. Position: This setting allows the user to adjust the display zone up and down vertical position.
Press the SCREEN SETUP button twice repeatedly to access the PC general setup menu.
Press the ▼/▲ button to highlight the selecting items, press the ►, ◄ button to select setting.
Language: This setting allows the user to select the PC menu language
Color R, Color G, Color B: used to adjust the color level of red, green and blue.
Reset: Press the ► button and all functions in the setup will return to the original factory set mode.
NOTE: Set the PC's resolution to 1024×768@60Hz.
PICTURE
►BRIGHT
CONTRAST
AUTO
PHASE
CLOCK
H.POSITION
V.POSITION
GENERAL
►LANGUAGE
RESET
COLOR R
COLOR G
COLOR B
1024×768
- 24 -
050
060
000
100
041
036
ENGLISH
050
050
050
60Hz
.