System Setting And Activation - Hyundai sonata Owner's Manual

While Driving
Blind-Spot Collision-Avoidance Assist
system may activate the Electronic
Stability Control (ESC) in accordance
with a colliding possibility with an
approaching vehicle while changing
lanes. It is to lower the colliding risk or
help mitigate the colliding damage.
WARNING
• Always be aware of road conditions
while driving and be alert for
unexpected situations even though
the Blind-Spot Collision Warning
system and Blind-Spot Collision-
Avoidance Assist system are
operating.
• Blind-Spot Collision Warning system
and Blind-Spot Collision-Avoidance
Assist system are supplemental
systems to assist you. Always pay
attention, while driving, for your
safety. Do not entirely rely on the
systems or an accident may occur.
• Blind-Spot Collision Warning system
and Blind-Spot Collision-Avoidance
Assist system are not substitutes
for proper and safe driving. Always
drive safely and use caution when
changing lanes or backing up the
vehicle.
Blind-Spot Collision Warning system
and Blind-Spot Collision-Avoidance
Assist system may not detect every
object alongside the vehicle.
6-68

System Setting and Activation

System setting
• The driver can activate the system
by placing the ignition switch to the
ON position and by selecting 'User
Settings → Driver Assistance → Blind-
Spot Safety'
- BCA and BCW turn on and get
ready to be activated when 'Active
assist' is selected. Then, if a vehicle
approaches the driver's blind spot
area a warning sounds or braking
power is applied.
- BCW turns on and gets ready to
be activated when 'Warning only'
is selected. Then, if a vehicle
approaches the driver's blind spot
area a warning sounds. Braking
assist will not be applied in this
setting.
- If you select "Off", BCW system
deactivates.
• If the engine is turned off then on
again, the system maintains the
previous state.
• The driver can select the initial
warning activation time in the
User Settings in the LCD display
or infotainment system display by
selecting 'User Settings → Driver
Assistance → Warning Timing'.