Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ELSA ECOMO 21S99
Summary of Contents for ELSA ECOMO 21S99
- Page 1 21S99 ELSA ECOMO...
- Page 2 ELSA. It is against the law to copy this manual or the software, in part or whole, in any medium, for any purpose other than to aid the purchaser in the operation on a single computer system.
- Page 3 Preface Thank you for placing your trust in this ELSA product. With the ECOMO 21S99 you have selected one of ELSA's high-end monitors. ELSA products are subject to the highest of standards in production and quality control which are the foundation for consistently high product quality.
- Page 4 Before you continue How to set up your ECOMO 21S99 is described in the Installation Guide. Please refer to this information first before you start reading this manual.
-
Page 5: Table Of Contents
Locking the Control Functions................15 Resetting the Values to the Factory Settings ............15 An Optimized Working Environment ................ 17 Monitor Picture Quality..................17 Tips for an Ergonomic Working Environment ............17 Lighting in your Working Environment............. 17 ELSA ECOMO 21S99... - Page 6 Why do we have Environmentally-Labeled Computers ? ........ 27 What does Labeling Involve ?................27 Environmental Requirements................28 Advice and Help....................30 Software Updates .................... 30 Who to Contact? ....................30 ELSA-ServiceDirect for ELSA ECOMO ™ Monitors ..........32 Warranty Conditions..................... 33 Index ..........................35 ELSA ECOMO 21S99...
-
Page 7: Introduction
Introduction Introduction Monitor Features The main features of the ELSA ECOMO 21S99 are described below to give you an over- view of the monitor’s capabilities. On-Screen Display Settings for the monitor can be adjusted quickly and easily using the on-screen display menu. -
Page 8: Package Contents
Introduction Plug&Play (DDC) The ECOMO 21S99 is equipped with the DDC1 and DDC2B functions (DDC = Display Data Channel), which the monitor can use to transmit information (e.g. graphics modes sup- ported and timing) to the host computer. This system works only if the host computer (the graphics card) also supports the DDC function. -
Page 9: Ce Conformity And Fcc Radiation Standard
Caution to the user: The Federal Communications Commission warns the user that chang- es or modifications to the unit not expressly approved by the party responsible for com- pliance could void the user’s authority to operate the equipment. ELSA ECOMO 21S99... - Page 10 Introduction ELSA ECOMO 21S99...
-
Page 11: The On-Screen Display
The ‘Option’ button performs a simple function. It is used to call up the on-screen menu and to confirm a selection and settings on a menu page. Also: to close the on-screen menu afterwards. ELSA ECOMO 21S99... -
Page 12: The Menu Pages
The Menu Pages The OSD of your ECOMO 21S99 contains various menu pages. We will now show you how to navigate around the pages, what they look like and how to adjust values: Tabbed menu page Simple menu page Selection menu page There are three different types of page. -
Page 13: Aspects Of Your Monitor
Power indicator The indicator lamp lights up when the monitor is switched on and indicates the status of the energy saving function (20)). Power switch Used to switch the monitor on and off ELSA ECOMO 21S99... -
Page 14: Rear Connectors Panel
A special BNC cable must be connected to these five sockets to connect the monitor to the graphics board signal. AC IN connector Plug the power cord in here. DDC is only possible using the video input 1 connector; this allows the ECOMO 21S99 data to be read. ELSA ECOMO 21S99... -
Page 15: Monitor Settings
Today’s graphics boards, and the ECOMO 21S99 , are capable of communicating using DDC (Display Data Channel). The ECOMO 21S99 can send its parameters to the graphics board. In turn, the graphics board ensures that the monitor operates at the highest pos- sible refresh rate for the resolution selected. -
Page 16: Overview Of All Pages
OPTION Manual degauss page 14 Selects the monitor input page 14 Positions the on-screen menu (horizontally) page 14 Positions the on-screen menu (vertically) page 14 Sets the energy-saving function page 15 Locks the control panel page 15 ELSA ECOMO 21S99... -
Page 17: Problems And Solutions
Move the cursor onto the desired GEOM option using the buttons. Try altering the setting for ‘PINCUSHION’ or ‘PINCUSH- ION BALANCE’ to correct the pincushion effect. Use the /‘ buttons to adjust the pic- ture geometry. ELSA ECOMO 21S99... -
Page 18: The Picture Tapers Towards The Top Or The Bottom
Use the selection keys to access the ‘PIC- TURE’ menu page. Move the cursor onto the SCREEN desired option using the buttons. Change the setting for ‘MOIRE’ using the /‘ buttons to correct the effect of moiré. ELSA ECOMO 21S99... -
Page 19: The Picture Has Blue Or Red Shadows
The three control bars on the OSD page will help The bars should coincide to adjust the convergence. The convergence value is correct exactly. when the color bars are “sharp”. The ECOMO 21S99 makes it possible to correct the conver- gence very accurately: Vertical convergence Horizontal convergence SCREEN... -
Page 20: Printer And Screen Colors Should Match
You can, of course, manually degauss the monitor. Selecting the Monitor Input You can connect two computers to the ECOMO 21S99 . You can deter- mine the computer from which the video signal is received by select- ing the input. Please note that DDC functions are only available on video input 1. -
Page 21: Let The Monitor Rest While Inactive
Monitor Settings Let the Monitor Rest while Inactive The ECOMO 21S99 has a three-stage power saving function 20). You Power Management can use the on-screen menu to set the delay time before the power Function saving function activates. Locking the Control Functions... - Page 22 Monitor Settings ELSA ECOMO 21S99...
-
Page 23: An Optimized Working Environment
Equally important is the overall arrangement of your working environment, which includes some basic rules about working with a monitor. The ELSA ECOMO 21S99 complies with the latest EU ergonomics guidelines (90/270/ EEC) for work places with monitors, which came into effect on the 1.1.97. -
Page 24: The Work Desk
It is important that you frequently shift your seating position – to practice the so-called "dynamic sitting" – and that you stand up once in a while. The Monitor Position The ECOMO 21S99 can be tilted and swiveled so that you can set up the monitor position to your liking. -
Page 25: Technical Data
EN 55022 Class B, EN 50082-1, EN 60555-2 certifications FCC Class B (FCC-ID: AK8GDM500PS) X-radiation German X-ray regulations dated 1987-01-08 Others TCO ’95 VESA DPMS EPA Energy Star MPR-II ISO 9241-3 (certified by TÜV Ergonomie) ZHI/618 NUTEK Spec. 803299/94 ELSA ECOMO 21S99... -
Page 26: Power Management Function
Technical Data Power Management Function The ECOMO 21S99 complies with the guidelines set by VESA and Energy Star together with the stringent standards of NUTEK. The ECOMO 21S99 will automatically reduce power consumption in three stages if the monitor is connected to a graphics board com- plying with VESA DPMS. -
Page 27: Video Input Connection To An Apple-Macintosh Computer
Technical Data The ECOMO 21S99 issues analog signals in accordance with the requirements of Guide- line RS-170. The synchronization information is sent separately. Video Input Connection to an Apple-Macintosh Computer Pin Assignment Signal Signal Red ground BLUE Video RED video... - Page 28 Technical Data ELSA ECOMO 21S99...
-
Page 29: Troubleshooting
15. The background white is too dark Check that the monitor is connected using a 5-pin BNC cable and that the plugs are connected in the correct order (from left to right: Red-Green-Blue-HD-VD). ELSA ECOMO 21S99... - Page 30 The monitor is automatically degaussed every time it is switched on switched on. This process lasts approx. 3 seconds, during which a hum may be heard. The same hum is heard even when the monitor is degaussed manually. ELSA ECOMO 21S99...
-
Page 31: On-Screen Messages
Troubleshooting On-Screen Messages The ECOMO 21S99 can take care of itself. The following on-screen message will appear if there is no sync signal: OUT OF SCAN RANGE No INPUT signal INPUT: 1 INPUT: 1 It may however be that the signal frequency is outside the permitted range. The message will appear in the second window if this is the case. - Page 32 Troubleshooting ELSA ECOMO 21S99...
-
Page 33: Appendix
The environmental demands concern among other things restrictions on the presence and use of heavy metals, brominated and chlorinated flame retardants, CFCs (freons), and chlorinated solvents. The product must be prepared for recycling and the manufacturer ELSA ECOMO 21S99... -
Page 34: Environmental Requirements
25 ppm (parts per million) of cadmium. The color- generating layers of display screens must not contain any cadmium. Mercury – is sometimes found in batteries, relays and switches. Mercury damages the nervous system and is toxic in high doses. The relevant bio-accumulative* TCO ELSA ECOMO 21S99... - Page 35 (malignant mela- noma). The relevant TCO '95 requirement: Neither CFCs nor HCFCs may be used dur- ing manufacture of the product or its packaging. * Bio-accumulative is defined as substances which accumulate within living organisms. ELSA ECOMO 21S99...
-
Page 36: Advice And Help
Internet WWW site www.elsa.de and direct via FTP from ftp.elsa.com. You will also find a wealth of information and answers to frequently asked questions (FAQs). Before you contact the ELSA Support team, please make sure that you are using the latest ELSA soft- ware (driver, firmware or INF file) versions. - Page 37 ELSA Service Hotline +49-241-6065112 ELSA World Wide You can contact the ELSA subsidiaries: ELSA, Inc. 2231 Calle De Luna Phone: +1-408-919-9100 Santa Clara, CA 95054 +1-800-272-ELSA Fax: +1-408-919-9120 ELSA Asia, Inc. 7F-11, No. 188, Sec. 5 +886-2-2768 57 30 Phone:...
-
Page 38: Elsa-Servicedirect For Elsa Ecomo ™ Monitors
Warranty, valid for the Federal Republic of Germany (refer to our Internet site: www.elsa.com). If the ELSA service cannot find fault with the unit claimed to be defective, we will invoice you for DM 200 plus V.A.T. to cover inspection costs and replacement of the unit. -
Page 39: Warranty Conditions
ELSA video conferencing systems with a warranty period of 36 months. Also excepted are the ELSA TFT Monitors with a warranty period of 12 months. This period begins at the day of delivery from the ELSA dealer. Warranty services do not result in an extension of the warranty period nor do they initiate a new warranty period. - Page 40 ELSA Monitor, damage to the cathode ray tube (CRT) has been caused especially by mechanical load (e.g. from shock to the pitch mask assembly or damage to the glass tube), by...
-
Page 41: Index
Sync signal ........... 25 Key balance ..........12 Keyboard lock ..........15 TCO ’95 ............1 Trapezium balance ........12 Lock ............... 15 Trapezoidal Distortion ........12 Moiré ............12 WWW ............30 Monitor Position ........... 18 ELSA ECOMO 21S99...
Need help?
Do you have a question about the ECOMO 21S99 and is the answer not in the manual?
Questions and answers