Advertisement
vehicle. For the convenience of those operators, a 'Display Timer Slide
Control Switch' has been added to the mirror.
A. When the Slide Control Switch is moved to the far right end position,
the Navigation image will remain on at all times.
B. When the Slide Control Switch is moved to the far left end position,
the Navigation image will remain off at all times.
C. Positioning the Slide Control Switch anywhere in the center area will
automatically enable an internal timer. The timer is adjustable
between 10 Seconds (further left) to 3 minutes (further right).
D. When the Navigation System is in guidance mode, every time a turn-
by-turn voice guidance command is received, the Navigation image
will automatically turn on and remain on for the pre-selected time set
by the Slide Switch. After the pre-set time has expired, the
Navigation display will turn off and remain off until the next voice
command is received.
HINT 1: When entering a new address into the Navigation Address Book, it
will be easier to move the Slide Control Switch all the way to the right to keep
the LCD display on until the address has been completed.
HINT 2: When in Timed Display Mode, you can press the "+" or "-" button on
the mirror to turn the Navigation image on for the full extent of the pre-set
time.
5. LCD Monitor Brightness Control
The brightness adjustment control is on the bottom right of the rearview
mirror.
Rotating the wheel to the right will decrease the brightness of the
monitor.
Rotating the wheel to the left will increase the brightness of the monitor.
5
Advertisement
