Software Installation - FAB Media Encoder User Manual

S O F T W A R E

Information

Software Installation

In case that the system has been delivered with hardware and software installed
proceed with the section "Cabling".
To install the software for FAB Media Encoder use the following procedure:
Install Windows
-
Install the driver for the Video in a window card
-
Install the driver for the timecode reader card
-
Install FT-MEDIAENC 1 FAB Media Encoder software from the FAB
-
CD ROM
When installing FT-MEDIAENC 1 FAB Media Encoder you will be prompted
to install the driver for the timecode reader card. You should do this only the
first time when installing the software. When installing software updates this is
not required. The timecode reader card driver should be installed according to
the jumpers that are set on the card. Make sure not to use any IRQ for the
timecode reader card.
9