Scratch-Pad Dialing; Scratch-Pad Dialing Withoutkeyingtones - Audiovox CTX3200 User Manual

other numbers can be sent with DTMF signaling by
simply pressing m for each additional number.
Note(l): Each number to be linked may be recalled
from memory or entered by keypad.
Note(Z): Each number to be linked should be within
16 digits including linking mark "=I' at the
end.
Linked number can be stored in the mem-
ory. However, number of more than 16
digits should be stored into memory address
91 through 99.
Example: To access the alternate long distance ser-
vice using a secret number, you should call
your long distance service office first, and
enter your ID number, then the phone number
to be placed.
1. Recall the phone number of the long distance
service office.
Press m then enter the memory address (01
through 99).
then key
Linking Mark " = " will be added at the end of the
number and vj will appear.
3. Recall your ID number stored in secret memory.
q
Press keys
I
Note: When you recall the ID number stored
without secret memory, omit step 3-l and
proceed to next step 3-2.
3-2. Recall your ID number.
q
Press /RCL/ key
4. Press -1 then key
5. Recall or dial the phone number to be called.
Press m then enter the memory address (01
through 99) to recall the phone number to be
called.
q
q
I I
q
then
I
q
Press m The /I indicator will light as
the call is placed. m will appear on the
readout.
After you received an answer from the long dis-
tance service office, press m again. The DTMF
signal will be placed and the DTMF tone of your
I D n u m b e r c a n b e m o n i t o r e d t h r o u g h t h e
loudspeaker. Dnk] will appear on the readout.
If your ID number is accepted, the long distance
service office will answer again, so press m
Then the long distance call will be placed and the
DTMF tone can be monitored through the
loudspeaker.
Note: The number linked in steps 1 through 5 can
also be stored in secret memory as stated in
the "Secret Memory".
1. When a set of linked numbers which
includes a secret number has been stored in
memory address, enter the three-digit secu-
rity code, press m
and then m to place the call.
will appear on the readout, and the first
linked number will be called as shown in
step 6 above.
If the secret number is not included in the
linked number, you need not enter the
three-digit security code in the above oper-
ation.
2. To complete the call, continue operations
as shown in steps 7 and 8.

SCRATCH-PAD DIALING

This feature permits you to enter a number to be
redialed (or store a number in memory
engaged in a conversation.
SCRATCH-PAD DIALING
WITHOUTKEYINGTONES
This feature permits you to activate scratch-pad
memory address,
while