AEG AGN2141 User Manual page 84

84 www.aeg.com
REMOVING THE TRANSPORT SUPPORT
SPACERS
3
Your appliance is equipped with transport
support to secure the door during trans-
portation.
To remove them do these steps:
• Open the door.
• Remove the transport support from the
door sides.
• Remove the transport support from the
lower hinge (some models).
Some models are fitted with a si-
2
lencing pad under the cabinet. Do
not remove this pad.
Install the spacers provided within the ac-
cessory bag as shown in the figures.
When two appliances are placed beside
each other, attach the adhesive spacers
between the appliances.
Install the spacers on the back side of the
panel.