Advertisement
Charging the Battery
To power the unit or charge the internal battery, connect the DC power input
on the speaker to a standard power outlet using the USB charging cable and a USB
power adapter (not included).
Bluetooth Wireless
Pairing & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by the user
or erased due to a reset of the device. If your device should become unpaired or
you find it is unable to connect, repeat the steps listed here.
1.
The speaker will power on in Bluetooth Mode. A voice will say, "Bluetooth, "
and the pairing indicator will flash the word "Blue". When pairing, remain
within 3 feet of the Bluetooth device.
2.
Using the controls on your Bluetooth device, scan for and select ISB380 in
your Bluetooth settings to pair. If your device requests a password, enter the
default password 0 0 0 0 . Refer to the user's manual for your specific device for
instructions on pairing and connecting Bluetooth devices.
3.
When successfully paired, the pairing indicator will turn solid and a voice
will announce the connection.
4.
Use the controls on the connected device to select and begin playing audio.
Audio played through the connected Bluetooth device will now be heard
through the speaker. Use the controls on the speaker or the connected
device to play, pause, and adjust volume.
Note: If your device should become unpaired or you find it is unable to connect, press
& hold the
button to enter to Pairing Mode. A voice will announce "Bluetooth is
connecting" and you can connect to the speaker manually.
Radio Reception and the 3.5mm Audio Cable (Not included)
An FM receiver is built into the speaker but functions best when a 3.5mm audio
cable is connected to the speaker. Adjust the position of the cable and the speaker
to improve FM radio reception.
Radio Tuning and Saving Station Presets
1.
Press the Mode button to switch to FM Radio Mode. The display will show
the station frequency, Ex: 101.1.
2.
Press and hold
to scan and save radio stations automatically. Radio
stations will be assigned a "Ch" number, Ex: Ch 18.
3.
Press
to tune the presets
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas frecuentes, visite la sección de
apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l'utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des questions fréquemment
posées, consultez la rubrique d'assistance sur: www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User's Guide, go to www.iLiveElectronics.com
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
Copyright © 2018 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners.
Specifications are subject to change without notice.
Battery life is approximately 2.5 hours
at 50% volume. Charging Time is
approximately 3-4 hours. While charging
the battery indicator light will display a
red light, and turn off when the battery is
fully charged.
USB Power Adapter
not included
FM Radio
SD Memory Cards & USB Drives
1.
Load a Micro SD memory card or USB drive into the appropriate port.
2.
The speaker will automatically switch to SD Card Mode ("SD" on the
display) or USB Mode ("USB" on the display) and begin playing media on the
connected storage device.
3.
Use the controls on the speaker to select and play audio from the
connected drive.
Requires a 3.5mm audio cable.
Connect a 3.5mm audio cable to the Line In on the unit and the
1.
audio output/headphone jack on an audio device.
2.
Press Mode to switch to Line In Mode ("LINE" on the display).
3.
Use the controls on the connected device to select and play audio.
Customer Support
Line In
Made
Green
Protect for Today
Sustain for Tomorrow
Advertisement
