iLive ISB33S User Manual

Warnings and Precautions

Warranty
• WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
For Warranty Information and the most up-to-date version of this
• WARNING: Do not place this unit directly onto furniture surfaces with any
type of soft, porous, or sensitive finish. As with any rubber compound made
User's Guide, go to: www.iLiveElectronics.com
with oils, the feet could cause marks or staining where the feet reside. We
recommend using a protective barrier such as a cloth or a piece of glass between
Contact Information the unit and the surface to reduce the risk of damage and/or staining.
• WARNING : Where the mains plug or appliance coupler is used as the
Email Support: prodinfo@dpiinc.com disconnect device, such disconnect device shall remain readily operable.
• Note : This device uses an internal rechargeable lithium-ion battery that should
Email Parts: partsinfo@dpiinc.com
last the lifetime of the device. If you suspect your battery may be dead after
several attempts to charge, please contact 1-888-999-4215 for support.
Phone Support: 1-888-999-4215
• Never disassemble the unit or attempt to remove the battery as
Website: www.iLiveElectronics.com
that could cause leakage of an electrolytic substance.
ISB33B-801-01-IB.indd 1-6

Pairing a Bluetooth Device

Playing Audio Wirelessly
1. Turn on the unit using the Power switch. The Pairing/Line In 1. Follow the instructions for Pairing a Bluetooth Device.
Indicator will flash blue slowly and will enter pairing mode.
2. Use the native controls on the connected
Bluetooth device to select a track.
When pairing, remain within 3 feet of the unit.
2. Using the native controls on your Bluetooth device, 3. To play, pause or skip the selected track, use the native
select the "ISB33" in your Bluetooth settings to pair. controls on the connected Bluetooth device.
If your device requests a password, enter the default password " 0 0 0 0 ". Refer to the user's 4. Audio played through the connected Bluetooth
manual for your specific device for instructions on pairing and connecting Bluetooth devices. device will now be heard through the speakers.
3. When successfully paired and connected, the Pairing Indicator
will display a solid blue light and a beep will sound from the unit.
After initial pairing, the unit will stay paired unless unpaired manually by the user.
If problems arise with pairing, press the Pair button to begin pairing again.
Using the 3.5mm Audio Input
1. Plug one end of a 3.5 mm audio input cable (not
included) into the 3.5 mm Audio Input on the unit.
The Pairing/Line In Indicator will display a green light.
2. Plug the other end of the cable into the audio output/
headphone output on an MP3 Player or other audio source.
3. Turn on the unit using the Power switch.
4. Audio played through the connected device
ISB33S
will now be heard through the speakers.
Bluetooth Mono Speaker
Note: Any audio being played through a connected Bluetooth Device
For the most up-to-date version of this User's Guide,
will cease once the 3.5mm Audio source is connected.
go to www.iLiveElectronics.com
USER'S GUIDE
V:801-01
4/18/2013 11:36:36 AM