Audiovox VM9414 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Audiovox Manuals
  4. Car Video System
  5. VM9414
  6. Operating instructions manual

Audiovox VM9414 Operating Instructions Manual

Audiovox vm9414: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
VM9414
Operating Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VM9414 and is the answer not in the manual?

Questions and answers

Related Manuals for Audiovox VM9414

Summary of Contents for Audiovox VM9414

  • Page 1 VM9414 Operating Instructions...

  • Page 2: Table Of Contents

    Thank you for choosing a Jensen product. We hope you will find the instructions in this owner’s manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use all the features of your new Jensen VM9414 Mobile Multimedia Receiver for maximum enjoyment.
  • Page 3 Call Transfer ... 50 Call Logs ... 50 Bluetoo h Auto Connect ... 51 Bluetoo h Streaming Music ... 52 Viewing JPEG Photos ... 53 Rear Monitor Video Display... 55 Troubleshooting ... 56 Error Messages... 58 Care and Maintenance... 58 Specifications... 60 VM9414...
  • Page 4 VM9414 NavMate Table of Contents Horizon NavMate Introduction ... 63 Key Features ... 63 About GPS and GNSS... 63 Horizon NavMate Navigation / Tele Atlas Map Data... 64 Safety Information... 65 User Agreement... 65 Driver Safety Rules ... 65 Basic Operation... 67 Acquiring a Satellite Signal ...

  • Page 5: Features

    VM9414 FEATURES Congratulations on your purchase of the Jensen VM9414 Mobile Multimedia Receiver. It’s a good idea to read all of the instructions before beginning the installation. We recommend having your Jensen VM9414 installed by a qualified installation shop. •...
  • Page 6 Rear camera input (normal and mirror image view) • Touch screen calibration mode • 2VRMS line output - all channels • Rotary encoder audio control • SWC interface – compatible with PAC adapter SWI-PS steering wheel control interface, sold separately VM9414...

  • Page 7: Optional Equipment

    See “Bluetooth Operation” on page 46. • Rear Camera The VM9414 is "camera ready." Before accessing any camera features, you must purchase and install a rear video camera. Once the rear camera is connected and operating properly, the CAMERA source mode will...

  • Page 8: Warnings

    VM9414 WARNINGS WARNING! Never install this unit where operation and viewing could interfere with safe driving conditions. WARNING! To reduce the risk of a traffic accident (except when using for rear view video camera) never use the video display function while driving the vehicle.

  • Page 9: Controls And Indicators

    VM9414 CONTROLS AND INDICATORS 1. OPEN Press to activate the automatic mechanical system and move the TFT monitor into viewing position. Press again to close the TFT. 2. BAND Press to change between three FM and two AM bands. 3. Disc Slot 4.
  • Page 10 VM9414 14. SD Card Input Insert an SD/MMC card (up to 8 GB) for playback of music/video files. 15. Touch Display 16. AS Press and hold to select six strong stations and store them in the current band. 17. MUTE Press to activate the MUTE function and silence the receiver.
  • Page 11 VM9414 CLOSE Press Audio VM9414 MUTE LOUD TILT P CTURE WIDE Enter AV IN...

  • Page 12: Remote Control

    REMOTE CONTROL See remote control tables in various sections for button functions. VIDEO MUSIC VM9414...

  • Page 13: Using The Tft Monitor

    VM9414 USING THE TFT MONITOR Open/Close TFT Monitor Open TFT Monitor Press the OPEN/CLOSE button (1) on the front panel or remote control to activate the mechanism that moves the display panel into the viewing position. Close TFT Monitor Press the OPEN/CLOSE button (1) on the front panel or remote control to load the display panel back into the compartment.

  • Page 14: Aspect Ratio

    NORMAL The conventional display image has a 4 to 3 ratio of horizontal to vertical, leaving a blank area on the right and left sides of the display. STANDBY Screen becomes black. Touch screen to resume. VM9414...

  • Page 15: Monitor Movement Mechanism

    VM9414 Monitor Movement Mechanism If an obstruction occurs in the monitor path, the following protective measurements can be executed to prevent damage to the mechanism or monitor: Table 1: Monitor Protective Measures Obstruction Self Protection Monitor loading Monitor is automati-...

  • Page 16: Operating Instructions

    When the monitor is closed, press the SRC button on the front panel (10) or remote control (8) to change between available audio playing sources in the following order: NAVI, RADIO, DISC, SD, USB, XM, BLUETOOTH, AV2, AV1, CAMERA, REAR. The mode is displayed on the LCD screen. button (4) on the remote VM9414...
  • Page 17 VM9414 Source Menu You can also use the touch screen to change the source through the Source menu. To access the Source menu, touch the top left corner of the screen or press the SRC button on the front panel (10) or remote control (8).

  • Page 18: Volume Adjustment

    Audio Function TREBLE MIDDLE BASS BALANCE SUBWOOFER MIDDLE VM9414 Adjustable Range -7 to 7 -7 to 7 -7 to 7 -9 (Left) to 9 (Right) -9 (Rear) to 9 (Front) -7 to 7...

  • Page 19: System Reset

    VM9414 NOTE: The EQ SETTING mode will automatically change to “USER” when individual audio functions are adjusted. The Audio menu will automatically exit after a few seconds of inactivity. To exit quickly, touch the top left corner of the screen or press the VOL rotary encoder (11).

  • Page 20: Steering Wheel Control (Swc)

    VM9414 Steering Wheel Control (SWC) The VM9414 is compatible with the PAC (Pacific Accessory Corporation) steering wheel control adapter SWI-PS. A 3.5mm female connector (labeled “SWC Interface”) on the back of the head unit allows connectivity to the PAC adapter. Please refer to the instructions included with the PAC adapter for detailed installation informa ion.

  • Page 21: Setup Menu

    VM9414 SETUP MENU To access system settings, press he MENU button (1) on the remote control or touch the top left corner of the screen where the current source is indicated, and then touch the on-screen SETUP button. The “Setup” menu appears, with the current sub-menu highlighted in yellow.

  • Page 22: Adjusting A Feature

    Automatically connect when your paired phone is in range. Select to automatically dim screen at dusk. Set radio volume at turn-on to last volume level or choose “adjust” to turn on at a pre-defined level. Pre-defined automatic turn-on volume level. VM9414 buttons.
  • Page 23 VM9414 Setting Options TFT Open Auto Manual Version View radio software version information. Video Sub-menu Features If he rear-view video camera is connected, the unit is on, and the TFT monitor is retracted inside the unit, the TFT monitor automatically moves into the viewing position and Camera mode is selected upon shifting into REVERSE gear.
  • Page 24 Gain SAT Gain -7 to 7 Increase or reduce the relative volume (Gain). DISC/ -7 to 7 Increase or reduce the relative volume (Gain). USB/SD Gain Tuner -7 to 7 Increase or reduce the relative volume (Gain). Gain Function VM9414...
  • Page 25 VM9414 Navigation Sub-menu Features Setting Options GPS Time Ignore Use GPS satellite time. Sync Use the radio set time. Time Zone NFT Select navigation time zone. Atlantic Eastern Central Mountain Pacific Alaska Turn daylight savings mode on/off. Misc Sub-menu Features The DVD system has a built-in parental lock feature to prevent unauthorized persons from viewing restricted disc content.

  • Page 26: Exiting The System Setup Menu

    VM9414 To reset the password, access the “Set Password” option and enter he current password to unlock the field. Access the “Set Password” again once unlocked and enter a new password. You must enter the same password twice to confirm.

  • Page 27: Tuner Operation

    VM9414 TUNER OPERATION Accessing Radio Tuner Mode To access the “Radio” screen, press the SRC button (10) on the front panel or touch the top left corner of the screen to access the Source menu, and then touch the “RADIO” icon. You can also press the SRC button (8) on the remote control until “RADIO”...

  • Page 28: Touch Buttons

    Press the BAND button on the screen or on the control panel (2), or press the /BAND button on the remote control (20) to select one of the following bands: FM1, FM2, FM3, AM1, and AM2. NOTE: See “Controls and Indicators” on page 5 for the location of control panel buttons. VM9414...

  • Page 29: Using Preset Stations

    VM9414 Using Preset Stations Six numbered preset buttons store and recall stations for each band. All six stored stations (P1-P6) for the current band appear on the screen. Storing a Station 1. Select a band (if needed), then select a station.

  • Page 30: Dvd/Vcd Video Operation

    VM9414 DVD/VCD VIDEO OPERATION NOTE: When properly installed, DVD video cannot be displayed on the main TFT screen unless the parking brake is applied. If you attempt to play a DVD while the vehicle is moving, the TFT screen displays “PARKING”...

  • Page 31: Accessing Dvd Mode

    VM9414 Accessing DVD Mode To switch to DVD mode when a disc is already inserted, press the SRC button (10) on the front panel or remote control (8). NOTE: See “Controls and Indicators” on page 5 for the location of control panel buttons.
  • Page 32 Stop playback Navigate on-screen menu Resume playback Play previous chapter Play next chapter Fast reverse Play) Fast forward Play) Zoom picture (+1 OFF) View on-screen playback informa- tion Enter digits for direct entry Access direct entry screen VM9414 Play) Play)

  • Page 33: Accessing The Dvd Menu

    VM9414 Accessing the DVD Menu Press the MENU button (1) on the remote control to recall the main DVD menu. Use the direc ional (arrow) buttons on the remote control to select a title from the menu or touch the title on screen.

  • Page 34: Vcd Pbc - Play Back Control

    • : (x1) Repeat Chapter, (x2) Repeat Title, (x3) Repeat Off • : Exit DVD mode and view Source menu • : Fast reverse (x2 • /||: Play/pause • : Fast Forward (x2 • : Stop Play) Play) VM9414...

  • Page 35: General Disc Information

    VM9414 General Disc Information Table 6: Disc Properties Symbol 12cm Disc Properties Single side single layer (DVD-5) Single side double layer (DVD-9) Double side single layer (DVD-10) Double side double layer (DVD-18) Single side single layer (VCD) Single side single layer Symbol Number of voice languages recorded.

  • Page 36: Cd/Dvd/Mp3 Audio Operation

    Instructions for TFT control and Insert/Eject are the same for DVD and CD operation. Please see the DVD/Disc Video Operation section for information about these topics. The VM9414 will play music or other audio files from the following disc media: • CD-DA •...

  • Page 37: Accessing An Sd Card

    VM9414 Accessing an SD Card 1. Locate the SD connector (14) on the front of the radio. 2. Insert the SD card into the SD connector. 3. Press the SRC button (10) on the front panel or touch the top left corner of the screen to access the Source menu, and then touch the “SD”...
  • Page 38 CD/DVD/MP3 audio playback are outlined below: DISC Sweetest Perfection Depeche Mode Violator 01:55 Press for more options. 12:15PM ROOT 1. World in My Eyes 2. Sweetest Perfec... 3. Personal Jesus 04:55 4. Halo Scan VM9414...

  • Page 39: Indicators/Controls

    VM9414 Indicators/Controls 1. (a) Current source (b) Touch to view “Source” menu and select a new source 2. Current track and total number of tracks on disc 3. Song title 4. Artist name (if available for MP3) 5. Album name (if available for MP3) 6.

  • Page 40: Direct Track Entry

    Direct Track Entry To select a track directly, touch the entry menu. Enter he desired track using the on-screen number pad. Press OK to play the selected track number. To backspace, touch Play) Play) button on screen to display the direct VM9414...

  • Page 41: Mp3/Wma File Requirements

    VM9414 MP3/WMA File Requirements This player allows you to play back MP3 and WMA files recorded onto CD-R/ RWs, DVD+R/RWs, and DVD-R/RWs. For CD-RW discs, please make sure it is formatted using the full method and not the quick method to prevent illegal disc operation.
  • Page 42 For example, a medium with the following folder/file hierarchy is subject to Folder Search, File Search or Folder Select, as shown below. The VM9414 player will only recognize three folder levels and does not display folders containing only other folders. In the example above, the unit will display folders 3, 4, 6, and 8, but not 2 and 7 since they do not contain any tracks directly.

  • Page 43: Xm ® Radio Operation

    VM9414 RADIO OPERATION ® Listeners can subscribe to XM www.xmradio.com, or by calling (800) 967-2346. Customers should have their Radio ID ready (see “Displaying the Identification (ID) Code”). Customers can receive a limited number of free-to-air channels without activation. Accessing XM Radio Mode...

  • Page 44: Indicators/Controls

    Before you listen to satellite radio, you must subscribe to the service using your radio’s identification number. To display the radio ID, press the | button on the touch screen repeatedly to tune to channel “000”. The screen displays the radio ID where the channel name is usually displayed. VM9414...

  • Page 45: Direct Channel Entry

    VM9414 Direct Channel Entry To select a channel directly, touch the direct entry menu. Enter the desired track using the on-screen number pad. Press OK to play the selected track number. To backspace, touch button on screen to display the...

  • Page 46: Ipod ® Operation

    27/35 World in My Eyes Depeche Mode Violator 00:55 Press for more options. Depeche Mode 25. Jezebel 26. Corrupt 27. World in My Ey... 04:43 28. Sweetest Perfe... Scan VM9414 2:04AM...

  • Page 47: Direct Channel Entry

    VM9414 Indicators/Controls 1. (a) Current source (b) Touch to view “Source” menu and select a new source 2. File number and total number of files 3. Song title 4. Artist name 5. Album name 6. Playback progress indicator 7. Elapsed playing time/total playing time for current file 8.

  • Page 48: Using The Ipod Menu

    If using the remote, press OK to select the highlighted option. 2:04AM Depeche Mode Press 25. Jezebel to view iPod menu. 26. Corrupt 27. World in My Ey... 04:43 28. Sweetest Perfe... VM9414 MENU 1. Playlists 2. Artists 3. Albums 4. Songs...

  • Page 49: Direct Track Entry

    Enter the desired track using the on-screen number pad. Press OK to play the selected file number. To backspace, touch NOTE: To transmit the video from your iPod to the VM9414 screen, you must set the following options through the iPod video settings menu: TV Out = On, TV Signal = NTSC, and Widescreen = On.

  • Page 50: Bluetooth Operation

    Corp., Toshiba and IBM in 1998, and it is currently developed by nearly 2,000 companies worldwide. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Audiovox Corporation is under license. Other trademarks and trade names are those of their respective owners.

  • Page 51: Accessing Bluetooth Mode

    VM9414 • Some mobile phones (like Sony Ericsson) may have a "Power Saving Mode" option. PLEASE DO NOT use the power saving mode with the VM9414. • Before accepting or making a call, make sure your mobile phone's Bluetooth function is turned on.

  • Page 52: Hands Free Profile (Hfp)

    However, depending on your phone, the connection may be made using HSP (Head Set Profile), making some functions unavailable. This is a limitation of your phone, not the VM9414. Since there are a number of Bluetooth mobile phone implementations available on the market, operations with your Bluetooth mobile phone using this unit vary greatly.

  • Page 53: Managing Incoming Calls

    Pairing Code field under the Bluetooth SETUP menu. The default pairing code for many phones is “0000”. The default code for the VM9414 is “1234”. 7. If your mobile phone displays a prompt requesting a pass key or pairing code, enter “1234.”...

  • Page 54: Making An Outgoing Call

    The screen will display “Updated Phonebook ### records...” while the phone book is downloading. 2. Once the download is completed, you can use the arrow buttons and on the left side of the window to navigate the list. button to dial the call. button. VM9414...

  • Page 55: Bluetooth Auto Connect

    3. Touch a number to dial it automatically. NOTE: Some mobile phones do not support Phone Book upload through Bluetooth. This is a limitation of the phone, not the VM9414. Dialed Numbers The Dialed Numbers list retrieves the list of dialed numbers from your phone.

  • Page 56: Bluetooth Streaming Music

    Bluetooth provides an Advanced Audio Distribution Profile (A2DP) for streaming music from a wireless phone or portable multimedia player (PMP), often called an MP3 player. The VM9414 allows you to play audio files from your phone or PMP using a Bluetooth connection.

  • Page 57: Viewing Jpeg Photos

    VM9414 VIEWING JPEG PHOTOS JPEG images stored as individual images or stored in folders can be accessed using the DISC/SD/USB interface. When a disc/card is loaded and read by the unit, the root menu will display the contents of the disc. Press the folder image to view the contents of a folder.

  • Page 58: Rear Camera Function

    VM9414 REAR CAMERA FUNCTION This unit is “camera ready.” Before accessing any camera features, you must install a rear video camera. When the camera is not installed and the function is accessed by gear selector being placed in reverse or by the unit’s menu, the message “VIDEO NOT DETECTED”...

  • Page 59: Rear Monitor Video Display

    VM9414 REAR MONITOR VIDEO DISPLAY This unit allows you to install one or two additional monitors (sold separately) for DVD/CD playback. You can play DVD video and another source simultaneously. For example, the unit’s screen can be set to Radio function while the rear passengers can watch a DVD/CD using an optional rear monitor.

  • Page 60: Troubleshooting

    Use original copy Connect proper speakers Check speaker contact Check wiring and correct Turn TFT Auto Open on Check wiring and correct Stop vehicle in safe place and apply parking brake Change setup to accommodate disc Check wiring and correct VM9414...
  • Page 61 VM9414 Table 10: Troubleshooting Problem Cause Prolonged Improper aspect ratio image or setup improper height/width ratio display Monitor stops Moving path is blocked at incorrect position TUNER Weak station Auto antenna is not fully searching extended Auto antenna not properly...

  • Page 62: Error Messages

    Warranty on this product. Corrective Action Corrective Action Clean disc with soft cloth Insert disc with label side up Insert disc Clean disc with soft cloth Insert disc with label side up Press EJECT key for 5 seconds to reset loading mechanism VM9414...
  • Page 63 VM9414 6. The CD player may not operate properly in extreme hot or cold. If such conditions occur, allow the interior of the vehicle to reach a normal temperature before using player. 7. When the vehicle warms up during cold wea her or under damp conditions, condensation may appear on the LCD panel.

  • Page 64: Specifications

    VM9414 SPECIFICATIONS DVD/CD Player Compatible Disc Media: DVD + R / RW (Single and Dual Layer) and CD-R / Compatible Media Formats: CD-DA, MP3, WMA, VCD, SVCD, MPEG1 / 2 Signal to Noise Ratio: >95dBA Dynamic Range: >95dB Frequency Response: 20Hz to 20 kHz, -3dB Channel Separation: >...
  • Page 65 VM9414 Fuse: 15-amp, mini ATM type DIN chassis dimensions: 7" X 7" X 2" (178mm x 178mm x 50mm) CEA Power Ratings Power Output: 13 Watts RMS x 4 channels into 4-Ohms @ < 1% THD+N Signal to Noise Ratio: 70dBA below reference (Reference: 1 Watt, 4-Ohms) Frequency Response: 20 Hz - 20 kHz, -3dB.
  • Page 66 VM9414...

  • Page 67: Horizon Navmate Introduction

    Turn by Turn Voice Guidance About GPS and GNSS The VM9414 uses a vehicle GPS (Global Positioning System)-based navigation device which utilizes digital map data to guide you from your selected location A to location B, using location information obtained from a Global Navigation Satellite System (GNSS).

  • Page 68: Horizon Navmate Navigation / Tele Atlas Map Data

    VM9414 Horizon NavMate Navigation / Tele Atlas Map Data The navigation map data covers the continental US, Alaska and Hawaii. The initial GPS location lock is best established when your vehicle is parked. If the device is in motion, the signal can take longer to initially connect. Once the initial coordinates are established, the software will follow you as you move and navigate.

  • Page 69: Safety Information

    VM9414 SAFETY INFORMATION User Agreement When the unit is first turned on, you will see the following message, warning you to operate your navigation system appropriately: You must agree to the above notice before using the navigation software. Touch the bar labeled “Press to accept.” to proceed to the Main Menu.
  • Page 70 • Do not use the VM9414 to navigate to a police station, hospital, etc. in an emergency. Call 911 for assistance. • Laws in some states prohibit wearing stereo headphones or may prohibit use or placement of a navigation device while operating a motor vehicle.

  • Page 71: Basic Operation

    VM9414 BASIC OPERATION Acquiring a Satellite Signal Drive your vehicle to an open area where the GPS signal can be clearly received and park the vehicle. If the device is in motion, the signal can take longer to initially connect.

  • Page 72: Using The Keyboard

    Press to return to the previous screen. Look Ahead Feature Your NavMate software offers a convenient interactive look-ahead search function to prevent misspelling. Only keys that lead to a search result can be pressed – all others are greyed out. VM9414...

  • Page 73: Selecting From Lists

    VM9414 After entering the second character, only letters that can be used to spell an existing destination will be available for selection of the third character, the fourth character, and so on. NOTE: On the keyboard screen, the “SPACE" button is located in the bottom center of the screen.
  • Page 74 Touch the marked item to select it. NOTE: Some lists keep track of the five most recently used selections, which are placed at the top of the screen. This feature allows you to quickly select popular choices. LINE ITEM UP SCROLL BAR LINE ITEM DOWN VM9414...

  • Page 75: Function Buttons

    VM9414 Function Buttons Table 2: Common Command Buttons Press the map icon to view your current location on the map or to return to map mode. Zoom in the map to show a smaller area. Zoom out the map to show a larger area.

  • Page 76: Main Menu

    The GPS position is indicated by a red/blue arrow. You can also browse the map, view businesses and other Points of Interest (POI, and then choose them for routing and navigating. The map knows two basic states: Tracking and Browsing. VM9414...
  • Page 77 VM9414 Map Tracking Screen During navigation, the screen displays your route (in yellow) and your surroundings. A red/blue arrow identifies your current position. The upcoming maneuver is visualized in the upper left corner, along with the distance and approximate time before that turn. When you come up to a turn, you will hear a voice command at the appropriate time.
  • Page 78 Your position is identified as the center of the crosshair. Crosshair Crosshair Location • To zoom in or out, press the + or – icons. • To return to the map tracking mode, press the button. button. VM9414 Business Icons...

  • Page 79: Trip Computer

    VM9414 2D/3D/Split Screen During navigation or map browsing, you can click the between 2D (default), 3D and Split Screen map views. SPLIT Trip Computer The Trip Computer provides information about your vehicle speed, trip related timing, elevation, odometer and clock.
  • Page 80 Press he blue /\ / V arrow buttons or use the scroll bar on the right side of the screen to navigate the list. • Use the buttons to move hrough he list page by page. • Touch the marked item to select it. • Press the button to reset the current reading. VM9414...

  • Page 81: Selecting A Destination

    VM9414 SELECTING A DESTINATION There are five different ways to find and choose a destination. Some methods allow you to select from a list using the arrow keys, while others allow you to search using an on-screen keyboard. NOTE: If a route is in progress when you exit the navigation system, the unit will prompt “Do you want to resume guidance?”...
  • Page 82 VM9414 The “Go To...” menu appears, allowing you to search for an Address or Intersection, select a POI (Point of Interest), enter map Coordinates, or select a favorite or recent destination. State or Province Address or Intersection After choosing the destination State or Province, press the Address or...
  • Page 83 VM9414 address or intersection in the previously selected state beginning with the City or by entering the Postal Code. To toggle between City and Postal Code entry, press the button. 1. Begin entering the city by typing the City name or Postal Code. The navi- gation software will utilize it’s look-ahead feature and only offer characters...

  • Page 84: Choosing A Location On The Map

    VM9414 Coordinates Press the Coordinates button to route to a destination by directly entering latitude and longitude values. Choosing a Location on the Map 1. From the “Main Menu”, press the button. The “Map - Tracking” win- dow will be displayed, indicating your last location:...
  • Page 85 VM9414 2. Touch any part of the map area to enter browsing (panning) mode and navigate the map. Use the +/– buttons to zoom in/out. 3. Press the button to view and select the address nearest the crosshair, or press Quick POI to locate a POI in the visible map area.

  • Page 86: Navigating To A Recent Location

    The origin of he last calculated route is also stored for easy return to your starting point. 1. From the “Main Menu”, select Go To... VM9414...
  • Page 87 VM9414 2. From the “Go To...” menu, select History. 3. A list of recent locations will appear on the screen. 4. Press to select a recent destination from the “History” list and view the “Start Route” screen. • Press the blue /\ / V arrow buttons or use the scroll bar on the right side of the screen to navigate the list.

  • Page 88: Navigating To Your Home Or Office Address

    VM9414 Navigating to your Home or Office Address The Home Address and Office Address buttons allow you to quickly navigate to your home or office address. If the home or office address is not already saved, a screen like the following will appear: Press the check mark to enter and save your home or office address.

  • Page 89: Choosing A Location From Your Address Book

    VM9414 Choosing a Location from your Address Book 1. On the “Main Menu”, press Go To... 2. On the “Go To...” menu, press Favorites. 3. Press Address Book to view a list of Address Book entries. 4. Select an Address Book entry.

  • Page 90: Following A Trail

    5. Press the Trail you would like to follow and a list of trail points will be displayed. 6. You can press to choose any Trail point as the stating point. Once a point is selected, the system will display a red dotted line from your current location to the starting point. VM9414...
  • Page 91 VM9414 7. Follow the red line to begin traveling along he trail. You can press the button and then press Stop Trail at any time to cancel the route.

  • Page 92: Selecting A Point Of Interest

    1. On the “Point of Interest” screen, press the Category button to view a list of possible categories. • Press the blue /\ / V arrow buttons or use the scroll bar on the right side of the screen to navigate the list. VM9414...
  • Page 93 VM9414 • Use the 2. Click an item on the list to select that category OR press the button to access the keyboard and enter a category directly. City 1. Press the City button to enter the city in which you would like to find a point of interest.

  • Page 94: Browsing Poi Destinations

    3. Press to select a POI destination and access the “Start Route” screen. Browsing POI Destinations 1. Press the button to display a menu of six common POI categories from which you can choose. buttons to move through the list page by page. VM9414...

  • Page 95: My Poi

    VM9414 2. Press to select Hospital, Restaurant, Parking Lot, Hotel, Gasoline Station or Atm and display a list of POI’s in that category. • Press the blue /\ / V arrow buttons or use the scroll bar on the right side of the screen to navigate the list.
  • Page 96 3. Determine map indicators and settings for your new Category. • Set Icons Shown: Press to select the marker that will represent POI destinations in your new Category. • Sound: Press to select a sound to be heard when you are nearing the destination (based on Distance). VM9414...
  • Page 97 VM9414 • Distance: Press to choose the distance from the destination at which you would like the chosen sound to be played. 4. Press the green check mark to complete the Category setup and confirm the Category entry. 5. Press the green check mark to confirm and add your new POI Category to the directory.
  • Page 98 Press the address box to edit name of your POI. • Press the Category box to select a category for your new POI. • Press the phone box, to use the on-screen keypad to enter the phone number for the new POI. VM9414...
  • Page 99 VM9414 4. Press the green check mark to save your POI entry. A confirmation screen appears. 5. Press the green check mark to confirm and save the current entry under the selected Category in your My POI list. Edit My POI List To edit items on your My POI list, press the following sequences of menu buttons: Go To...

  • Page 100: Navigating

    VM9414 NAVIGATING The powerful capabilities of your navigation software will guide you along the shortest or quickest route from A to B – with voice commands and in 3D (optional). To begin navigation, select a location using the Go To... feature (see “Selecting a Destination”...
  • Page 101 VM9414 Intersection Zoom As you approach an intersection, the map will automatically zoom in to show a close-up view of the roads near the intersection point on the right side of the screen. Route Interruptions If you inten ionally or accidentally leave the current route, the NavMate software will automatically recalculate the route and prompt you to get back on track to your destination.

  • Page 102: Browsing The Map During Navigation

    If you are unable to complete the route as calculated, you can add a Detour to the route that will allow you to stay on track to your destination. 1. To add a Detour while navigating, press the “Main Menu” and then press Edit Route. button to return to the VM9414...

  • Page 103: Arriving At Your Destination

    VM9414 2. Press Detour to view the “Detour” screen. 3. Choose a parameter for the Detour from the on-screen list. • Press the blue /\ / V arrow buttons or use the scroll bar on the right side of the screen to navigate the list.

  • Page 104: Managing Favorites

    VM9414 MANAGING FAVORITES The “Edit Favorites” menu allows you to save your home and work locations, as well as other frequent destina ions for easy recall. After entering an address or searching for a POI, you can choose the Save option to bookmark your...

  • Page 105: Edit Address Book

    VM9414 Edit Address Book The “Address Book” feature allows you to store and edit address book entries. To edit your address book, perform the following steps: 1. Press the button to access the “Main Menu” screen. 2. Press the following on-screen buttons in the order listed: a.

  • Page 106: Edit Trip Book

    77 to locate the home or work address. Edit Trip Book The “Trip Book” is a collection of trips with each trip representing a set of multiple destinations. 1. To access the Trip Book function, press the Trip Book button on the “Edit Favorites” menu. VM9414...
  • Page 107 VM9414 2. Press the Add button to create a new Trip or the Edit button to edit an existing Trip. Add New Trip 1. After pressing the Add button, use the on-screen keyboard to enter a name for your trip.
  • Page 108 To... > Favorites > Edit Favorites > Trip Book > Edit from the “Main Menu”. 2. Press to highlight the Trip you want to modify. The “Edit” screen appears. button to save the Trip name and go to the “Trip VM9414...

  • Page 109: Edit Trail Book

    VM9414 3. Press to highlighted a Trip and view the destination screen for your trip. 4. Use the buttons at the bottom of the screen to make changes to you trip destinations or to add a new destination. • Touch to highlight a destination.
  • Page 110 1. To access the Trail Book function, press the Trail Book button on the “Edit Favorites” menu. 2. Press the Add button to create a new Trail or the Edit button to edit an existing Trail. VM9414...
  • Page 111 VM9414 Create a New Trail After pressing the Add button to create a new trail, you will see the “Name Trail Book Entry” screen, shown below: 1. Press the button to clear he default entry, if desired. 2. Use the keyboard to enter the name for your Trail. (See “Using the Keyboard”...
  • Page 112 7. When finished, press the Edit Trail 1. To edit an existing Trail press the following sequences of menu buttons: Go To... > Favorites > Edit Favorites > Trail Book > Edit from the “Main Menu”. button and then choose Stop Trail. VM9414...
  • Page 113 VM9414 2. Press to highlight the Trail you want to modify. The “Edit” screen appears. 3. Press Color to choose from ten colors for your dotted line guidance. Press the desired color to apply that color and return to the “Edit” menu.
  • Page 114 3. Press the garbage can icon to delete the highlighted trail. 4. Press the green check mark to confirm deletion. Set Up Trail Display 1. To set a map scale display preference for trails, press the Setup Display option on the “Trail Book” screen. VM9414...
  • Page 115 VM9414 2. Press to select the desired map scale. 3. Press the green check mark next to each trail to which you would like to apply he map scale setting.

  • Page 116: Setup Menu

    Shortest Time: Calculate route based on the fastest time. • Avoid Freeway: Try not to use highways when calculating routes. • Avoid Tolls: Do not use toll roads when calculating routes. • Use Ferries: Use ferry travel when calculating routes. button to return to the previous screen. VM9414...

  • Page 117: Display Options

    VM9414 • Simulation: Enable simulation mode (perform simulated navigation when not traveling). • Auto Recalculation: Automatically recalculate the route if a wrong turn is made. • Voice Guidance: When on, the system will give voice prompts. • Announcement Tone: When on, the system will give a double tone to alert you of the next turn.

  • Page 118: User Preferences

    “08:35 PM would be “20:35” in 24-hour display mode. Press the button to save your time setting and return to the “User Preferences” menu. Distance Units Settings Press to select one of the following units for distance measurements: • Miles • Kilometers/Meters • Miles/Yards VM9414...
  • Page 119 VM9414 Day/Night Settings From the Day/Night Settings menu, press to select Day or Night mode, shown below. Press Auto. to allow the mode to be chosen automatically based on the time of day. Point of Interest Icon Setup This option allows you to choose a specific POI icon scale for selected POI categories.

  • Page 120: Location Reset

    Press the SOUND Mute button to silence or resume the voice command volume. GPS Diagnostics View satellite information for diagnostic use, including he number of satellites currently in view and how many are being used. You can also view the GPS time along with the current latitude and longitude. VM9414...
  • Page 121 VM9414 System Information View software version, map version and copyright information.
  • Page 122 Audiovox Electronics Corporation Hauppauge, NY 11788 Technical Assistance: 1-800-323-4815 www.jensen.com © 2010 Audiovox Ver. 030510 Printed in China...

  • Page 123: Tools And Supplies

    VM9414 Head Unit Single DIN Sleeve Wiring Harness Parking Brake Sensor Extension Wire Mounting Hardware You will need these tools and supplies to install your VM9414: • Torx type, À at-head and Philips screwdrivers • Wire cutters and strippers •...

  • Page 124: Disconnecting The Battery

    To prevent a short circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to in- stallation. NOTE: If the VM9414 is to be installed in a car equipped with an on-board drive or navigation computer, do not disconnect the battery cable. If the cable is disconnected, the computer memory may be lost. Under these conditions, use extra caution during installation to avoid causing a short circuit.

  • Page 125: Final Installation

    NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the radio. The VM9414 uses one 15 amp fuse, located in the black ¿ lter box in-line with the main wire harness. Final Installation After completing the wiring connections, turn the unit on to con¿...

  • Page 126: Wiring Diagram

    Wiring Diagram IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or have the installation handled by an experienced technician. For basic iPod connectivity, you can use the white 30-pin to USB iPod cable that came with your Apple device. For iPod video playback, you must purchase the jLink-USB cable.
  • Page 127 musIc. oose from o. e • C mO [on songs imd 6.000 and'oboo . e P3 tracks pJa on our camp 'er IP payer ., Tee 14-day tri an Jan' im • downlo ds...
  • Page 130 56-2000 PROFESSIONAL INSTALLATION' OR DIY SERVICES \, p ,. 01. 11<"( Online Seh,«ulinl Cuslomer Semel '-:,1+ _1:._ !!!.!f.~~_ IncJlJd/ng In-Cor Product DO-IT-YOURSElF INSTALLATION SUPPORT DlIWlIlo,d Instructions DIy or Niahl2H [JSJ·to-lollow Instructions just I elk;k away Profmlolllilnslllilation semc.s uliliblt "tided" Questions Comments lHMil'seMoe@~oom •...
  • Page 132 Who is covered? The Company extends this warranty to the original retail purchaser of products purchased through an authorized Audiovox retailer in the U.S.A., Puerto Rico or Canada. This warranty is not transferable or assignable. Proof of purchase is required in the form of an original sales receipt.

Table of Contents