Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEC MM701
Summary of Contents for AEC MM701
- Page 1 MM701 7” LCD OVERHEAD MONITOR OPERATION MANUAL 1286534A.p65 3/28/2003, 2:20 PM...
-
Page 2: Safety Precaution
IMPORTANT An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in ‘park’... - Page 3 Congratulations on your purchase of the Movies 2 Go MM701 drop-down Video Monitor. The MM701 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment.
-
Page 4: Front Panel Features
FRONT PANEL FEATURES 1286534A.p65 MM701 3/28/2003, 2:20 PM... -
Page 5: Front Panel
1. Infrared Transmitter – Used to transmit audio to wireless headphones. 2. Dome Lights – Provide additional interior illumination. 3. Power ON/OFF Select Switch – Turn the MM701 on and off. 4. Select Up Button – Adjust picture quality and source selection. - Page 6 TURNING THE MM701 ON OR OFF 1. Sliding the screen release lock forward will unlock the LCD screen and drop down slightly. Move the screen downward and pivot it until a comfortable viewing angle is reached. The internal friction detent will hold the screen in position while the system is in use.
-
Page 7: Operation
OPERATION OVERHEAD DOME LIGHTS The Dome Lights integrated into the MM701 are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle’s... -
Page 8: Remote Sensor
REMOTE SENSOR The MM701 incorporates an Infrared sensor which relays signals from the remote control to allow an auxiliary source to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as a Video Cassette Player or DVD Player. -
Page 9: Picture Adjustment
COLOR intensity To restore the factory settings, select the item RESET and press UP / DOWN button. All the picture adjustment function (CONTRAST, BRIGHTNESS, TINT and COLOR) will go back to the factory settings. MM701 1286534A.p65 CONTRAST BRIGHTNESS TINT COLOR... -
Page 10: Source Select
To exit the main menu, press MENU button to select EXIT OSD and press UP / DOWN button, the menu will disappear. NOTE: The menu also disappears from the screen automatically if you do not press any button within few seconds. 1286534A.p65 CONTRAST BRIGHTNESS TINT COLOR INPUT SELECT RESET EXIT OSD 3/28/2003, 2:20 PM MM701... -
Page 11: Optional Accessories
The second video input may be connected to a DVD player, video game system, or other audio / video input. To play the Video 2 source, turn the MM701 ON and press the Menu button on the MM701 to select INPUT SELECT and press UP/ DOWN button until “AV2”... -
Page 12: Troubleshooting
Verify that the batteries in the remote are fresh. ¨ Verify that the remote sensor eye is not obstructed. ¨ Verify that the infrared transmitter is affixed over the sensor ¨ eye of the component to be controlled. 1286534A.p65 MM701 3/28/2003, 2:20 PM... -
Page 13: Specifications
Edge Light Tube Resolution 800 X 480 Pixels 800 X 480 X 3 Operation Temperature 0 - 50º C Storage Temperature -20 - 70º C Expected Backlight life 10,000 Hours Video Display System NTSC / PAL MM701 1286534A.p65 3/28/2003, 2:20 PM... -
Page 14: 12 Month Limited Warranty
12 MONTH LIMITED WARRANTY Applies to AEC Mobile Video Products AEC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.