Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for AEC MM1021
Summary of Contents for AEC MM1021
- Page 1 MM1021 10.2” LCD OVERHEAD MONITOR ON OFF AUTO POWER MENU DOWN OPERATION MANUAL...
-
Page 2: Important Notice
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is in “park”... -
Page 3: Power On/Off
Congratulations on your purchase of the Movies 2 Go MM1021 drop-down Video Monitor. The MM1021 has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. -
Page 4: Front Panel Features
FRONT PANEL FEATURES ON OFF AUTO POWER MENU DOWN MM1021... -
Page 5: Front Panel
FRONT PANEL 1. Infrared Transmitter – Used to transmit audio to wireless headphones. 2. Remote Sensor – For Remote Control operation of the MM1021. 3. Dome Lights – Provide additional interior illumination. 4. Three Position Dome Light Switch • Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination. - Page 6 The internal friction detent will hold the screen in position while the system is in use. 2. Press the power button to turn on the MM1021. 3. After the unit is turned ON and begins to display a picture, adjust the viewing angle by pivoting the screen to optimize the picture quality.
-
Page 7: Operation
OPERATION OVERHEAD DOME LIGHTS The Dome Lights integrated into the MM1021 are controlled by a three position slide switch. Sliding the switch to the ON position will turn the lights ON. The OFF position will prevent the lights from turning ON with the vehicle’s interior lighting, and the auto position will allow the lights to turn ON and OFF with the vehicle’s... -
Page 8: Remote Control Sensor
REMOTE CONTROL SENSOR The MM1021 infrared sensor will relay signals from the remote control to allow an auxiliary source to be controlled simply by pointing its remote control at the remote sensor eye. This provides control of auxiliary equipment such as a Video Cassette Player or DVD Player. - Page 9 REMOTE CONTROL UNIT BUTTONS CONTROLS LCD : Power On / Off Button for the MM1021 monitor VCP : Power On / Off Button for an Optional Audiovox VCP SOURCE : Button for selection of AV1 and AUX MENU/ENTER Button – : Volume / Select Down Button + : Volume / Select Up Button REW : ...Rewinds Tape...
-
Page 10: Select Video
To exit the main menu, press the MENU button of Remote Control again to Exit, the menu will disappear. NOTE: The menu also disappears from the screen automatically if you do not press any button within a five seconds. MENU SELECT VIDEO EXIT MENU MM1021... - Page 11 TINT Increases the greenish skin tones To restore the factory settings, select RESET and press the ENTER button. All the picture adjustments (BRIGHTNESS, CONTRAST, COLOR and TINT) will go back to the factory settings. MM1021 MENU MENU PICTURE CONTRAST BRIGHTNESS...
-
Page 12: Screen Mode Select
To select the screen format highlight MODE SELECT and press the ENTER button to enter the submenu. Then press the UP or DOWN button to select from16:9 or 4:3. Press ENTER to confirm the setting. MENU SELECT VIDEO SET PICTURE MODE SELECT EXIT MODE SELECT 16 : 9 4 : 3 EXIT MM1021... -
Page 13: Optional Accessories
AV adapter cable input. To play the AUX source, turn the MM1021 ON and press the Menu button, the main menu will appear. Select SOURCE and then press the menu/enter button. -
Page 14: Troubleshooting
When the IR Sensor is Inoperative • Verify that the batteries in the remote are fresh. • Verify that the remote sensor eye is not obstructed. • Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled. MM1021... -
Page 15: Specifications
SPECIFICATIONS LCD Backlighting CCFL Resolution 800 X 480 Pixels 1,152,000 Operation Temperature 0 - 50º C Storage Temperature -20 - 70º C Expected Backlight life 10,000 Hours Video Display System NTSC Power Source 12VDC MM1021... -
Page 16: 12 Month Limited Warranty
AEC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with reconditioned product (at the Company's option) without charge for parts and repair labor.
Need help?
Do you have a question about the MM1021 and is the answer not in the manual?
Questions and answers