EAI YDLIDAR X2 User Manual page 6

After extracting the driver package, run the CP2102's Windows driver installation file (exe file
under CP210x_VCP_Windows). Please select the 32-bit version (x86) or 64-bit version (x64)
installation program according to the version of the windows operating system.
FIG 4 YDLIDAR DRIVER VERSION SELECTION
Double-click the exe file and follow the prompts to install it:
FIG 5 YDLIDAR DRIVER INSTALLATION I
After the installation is complete, you can right-click on My Computer and select Properties. On
the Open System screen, select Device Manager from the left menu to access the Device
Manager.
Expand [Port] to see the serial port name corresponding to the identified USB adapter, that is, the
driver installation is successful. The following figure shows COM3. (Note that the port must be
checked in case of Lidar and PC interconnection).
FIG 6 YDLIDAR DRIVER INSTALLATION II
www.ydlidar.com Copyright 2015-2020 YDLIDAR 6/11