Windows Usage Guide; Device Connection - EAI YDLIDAR X2 User Manual

Item
Lidar
USB cable
USB adapter board
PH2.0-8P cable
Note: USB adapter board has two USB Type-C interfaces: USB_DATA, USB_PWR.
Nobmxvm
USB_DATA: Data-powered multiplex interface. In most cases, this interface can be used to meet power and
communication requirements.
USB_PWR: Auxiliary power supply interface. The USB interface of some development platforms has weak
current drive capability. At this time, auxiliary power supply can be used.

WINDOWS USAGE GUIDE

Device connection

When evaluating and developing Lidar under windows, you need to interconnect Lidar and PC.
The specific process is as follows:
CHART 1 YDLIDAR DEVELOPMENT KIT DESCRIPTION
Qty
1
Standard version
Use with USB adapter board to connect Lidar and PC.
1
It is both a power supply line and a data line.
This component is used for USB to UART functions.
Also supports the serial port DTR signal to the Lidar motor stop control.
1
PWR is provided for auxiliary power supply.
This component meets the user's development needs in a multi-platform
1
environment.
FIG 1 YDLIDAR X2/X4
www.ydlidar.com Copyright 2015-2020 YDLIDAR
Description
4/11