gefran SBI-DCP-33 Instruction Manual page 10

1 - Assembly and connection
10 - ENGLISH
● Stop bits:
● Master Slave:
- Lift Controller is master
- Drive Controller is slave
- messages are sent with cycles of 15 ms
- Switch the drive off.
- Remove the cover of the drive as described in section 4.1 of
the AVyL Drive instruction manual.
- The SBI-DCP card can be installed in the drive in two positions:
A (recommended) or B (if other optional EXP-...-type cards have
already been installed).
The card is supplied with the necessary supports, spacers, screws
and cable for assembly and connection:
A - SBI-DCP33 card under the regulation card). Use the supports
and spacers (B-D) and the screws (A) supplied with the card.
 A
A
3 A4
A
1