Solutions To Projector Power Or Shut-Off Problems - Epson LS300BATV User Manual

Solutions to Remote Control Problems
Solutions to HDMI Link Problems
Parent topic:

Solutions to Projector Power or Shut-Off Problems

If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.
• Turn off the HDMI CEC setting. If this resolves the issue, check the settings on connected devices and
make sure the projector is not receiving shut down requests over CEC.
• If the projector's laser shuts off and the Status light is orange, the projector has overheated and shut
off. Check the solutions for this light status.
• If the power button on the remote control does not turn on the projector, check its batteries.
• Make sure Sleep Mode is not in effect. Perform any operation to wake the projector. To turn off Sleep
Mode, select Off as the Sleep Timer setting.
• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord
and contact Epson.
• The cooling fans may run in standby status depending on the projector settings. Also, when the
projector wakes from standby status, the fans may cause an unexpected noise. This is not a
malfunction.
• Make sure there are no obstacles interfering with the projection window. Clean the obstacle sensor if
there are no obstacles.
Parent topic:
Related references
Where to Get Help
Where to Get Help (Latin America)
Projector Light Status
Projector Feature Settings - Settings Menu
Image Quality Settings - Picture Menu
Related tasks
Cleaning the Obstacle and Motion Sensors
Solving Problems
Solving Projector or Remote Control Operation Problems
79