Image Shape; Correcting Image Shape With Corner Adjustment - Epson LS300BATV User Manual

Image Shape

You can project an evenly rectangular image by placing the projector directly in front of the center of the
screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off
to the side, you may need to correct the image shape for the best display quality. After correction, your
image is slightly smaller and you may see a slight shadow around the screen or projected image. This is
normal.

Correcting Image Shape with Corner Adjustment

Parent topic:
Correcting Image Shape with Corner Adjustment
You can use the projector's Corner Adjustment feature to correct the shape and size of an image that is
unevenly rectangular on all sides.
Note: To provide the best possible image quality, adjust the projector's position to correct the image
shape. If this isn't possible, use the Corner Adjustment feature to correct the image shape.
1. Turn on the projector and display an image.
2. Press the
You see the Corner Adjustment screen:
3. Use the arrow buttons on the remote control to select the point on the image you want to adjust.
Then press Enter.
Using Basic Projector Features
Corner Adjustment button on the remote control.
37