Assembly Of Partially Pre-Assembled Metal Legs - W.Schillig Quadroo 17350 Assembly

Assem bl y o f pa r t i a l ly p r e - a s s e m b l e d m e ta l l e g s :
Unscrew the transportation legs. Now you have to screw in the short hexagonal head
screw at the same position into the installed retainer. Please screw in carefully into the
thread – do not over tighten. ▻ Fig. 8 and 9
Now place the leg on the mounting and affix it with the long hexagonal head screws
▻ Fig. 10
Finally, carefully tap the plastic protective cap into place. ▻ Fig. 11
It is recommended that felt pads will be affixed in respect of sensitive floors.
–12 –
8 9
10
11